Remove serpentine belt P/S pump needs to be disconected by removeing 2 bolts that can be accessed thru the holes in the pulley Disconnect all lines going into unit (use flared end wrench to remove pressure line) Install new unit Add fluid and turn steering wheel from left to right with engine off to remove air from system. Ensure fulid level is correct.
what type pf power steering fluid take for a 94 buick lesabre
With Buick, The "Limited" is always the more expensive upgrade version.
Custom is lower end. Limited has more features.
Buick LeSabre no matter what model comes standard with power steering.
where is the relay located on a 87 lesabre
Loosen the power steering lines at the lowest point and drain into a bucket. Remove the 98 LeSabre pump belt, then remove the lines. Unbolt and remove the pump, then bolt in the new one. Connect the lines and belt before filling the pump with new fluids.
The 1993 Buick LeSabre Limited 4 door sedan has a curb weight of 3,454 lbs.
The power steering reservoir is located low behind the right side of the motor very close to the fire wall on 1998 Buick Lesabre.
Thanks
Owner's manual.
pictures of where to put power steering fluid in a 1990 buick lesabre
IT IS ON THE PASSENGER SIDE OF THE MOTOR IN THE BACK.