i need to know how to get the axle shaft out of my Ford f150 its a 1999 i took off the brakes the caliper i took off the back plate off the back of the pumpkin and your supposed to pull a c clip off and slide out the axle but how do you get the c clip off i cant figure it out can anyone help me out my e-mail address is jim13kar@msn.com thank you
How to remove the right side axle half on a 1995 f150
6,800lbs
how do you replace a Ford F150 rear axle seal
how to remove rear axle from 1988 f250 ford
i need to know how to get the axle shaft out of my Ford f150 its a 1999 i took off the brakes the caliper i took off the back plate off the back of the pumpkin and your supposed to pull a c clip off and slide out the axle but how do you get the c clip off i cant figure it out can anyone help me out my e-mail address is jim13kar@msn.com thank you
its located at the rear drive axle
I am not positive about this but, I believe that this indicates that the axle has a 3.00:1 gear ratio. Check with you local Ford dealer for a definitive answer.
I believe you can find the axle code on one of the stickers on the end of the drivers door - then the code is used to find out what differential gearing your F150 has
To replace the rear axle on a 1999 Ford Ranger, start by safely lifting the truck and securing it on jack stands. Remove the rear wheels and brake components, then disconnect the driveshaft, brake lines, and any suspension components attached to the axle. After supporting the axle with a jack, remove the mounting bolts, and carefully lower the axle from the vehicle. Install the new axle by reversing the removal steps, ensuring all components are properly reconnected and torqued to specifications.
Open the drivers door and look for an information sticker on the end of the door It will have the axle code for your truck
front of the vehicle drivers side above the front axle
A limited slip differential with 3.55 gearing , Ford , 3800 pound capacity