1.Take off the tire... there will be little washers ont the wheel studs remove and discard there not needed 2.Take the caliper off the mounting bracket 3.remove the bracket ...and pull off the rotor
special socket required to remove nut that retains rotor and wheel bearing. use impact gun . be prepared to repack and reset wheel bearing
how do i find the neutral, or clutch switch on a 2003 ford F150?
to remove the front rotors u must first remove the caliper and caliper frame then remove the nut in the center of rotor rotor should fall off then hope this helps fordtech
How do you remove and replace the battery on a 2001 Ford F150?
Ford Dealer can help you. And tell you if there is anything wrong with your 2003 F150.
How to remove the factory radio and disconnect wirring harnes in a 2004 f150 ford truck
295 ft-lbs
Remove caliper,rotor comes right out
how do i remove the computer on a 1989 ford f-150
To replace the rotors on a 1996 Ford F150 4X4, first, lift the vehicle and remove the front wheels. Then, remove the brake caliper by unbolting it and hang it securely to avoid strain on the brake line. Next, take off the caliper bracket and remove the old rotor by unscrewing any retaining screws, if present. Finally, install the new rotor, reattach the caliper and bracket, and ensure everything is torqued to specification before reinstalling the wheels.
remove lifters from a 1999 ford f150
Remove the have pitman arm seal retaining cover from your 2003 Ford F1 50 pickup truck. The seal will be visible. Use a seal puller to remove the seal.