Apparently this is a common problem. The tow truck driver that rescued us carried a 5 foot length of 4x4 for this purpose. Once the vehicle is off the ground, properly supported, and the lug nuts are off, use the 4x4 to hit the back of the tire with considerable force. You may have to rotate the wheel 180 degrees and repeat.
no
How can I remove a stuck aluminum wheel
Remove your front axles.
Remove the wheel, Remove the hub, take hub to a press, then press it out, installation is opposite removal.
http://www.paulstravelpictures.com/GM-Wheel-Bearing-Hub-Assembly-Replacement/index.html
To replace the speed sensor on a Honda Pilot you first need to research it. There are two speed sensors on the Honda Pilot. One is on the transmission the other is on the left front wheel. To replace the one on the tranny all you do is unscrew it. To change the other you have to remove the wheel, brake caliper and caliper bracket. Then you remove the hub. Then you pull it out.
it may be hard to do, but turn the wheel and then turn the key out. its a safety feature.
Your bike wheel nut may be stuck due to rust, over-tightening, or debris. To safely remove it, try using penetrating oil, a wrench, and a hammer to gently tap the nut. Avoid using excessive force to prevent damage. If the nut remains stuck, seek assistance from a professional bike mechanic.
The 2003 Honda Pilot has all wheel drive.
The 2011 Honda Pilot has front wheel drive.
The 2006 Honda Pilot has front wheel drive.
The 2012 Honda Pilot has front wheel drive.