Take a 5/8 spark plug socket, I'm pretty sure its 5/8 if not it'll be 13/16. You will most likely need an extension atleast 2 inchs long. Your spark plugs are located in between runners on your exhaust manifolds in the head. Break them loose, unscrew them, find out what you need to gap the plugs to, using a feeler gauge to check the gap, smash the prong on the spark plug until desired gap is reached, install new spark plugs, only hand tighten, DO NOT torque spark plugs into the heads you'll regret it later on.
You have to jack the car up and chang them from underneth.
You have to jack the car up and chang them from underneth.
To change the spark plugs on an '89 Pontiac Firebird with long tube headers, first, ensure the engine is cool. Remove any necessary components that may obstruct access to the spark plugs, such as the intake or wiring harness. Use a spark plug socket and a ratchet to carefully unscrew and remove the old plugs, then install the new ones, ensuring they are properly gapped and torqued to the manufacturer's specifications. Reassemble any removed parts and reconnect the spark plug wires.
Which engine, V6 or V8?Which engine, V6 or V8?
how to chang spark plugs in a 1992 Pontiac grand prix
on top of the engine there is a cover sheild. remove the cover by the four bolt. the plug boots will come with it, the spark plugs are down in the holes.
To change the spark plugs on a 2008 Pontiac Vibe, first, ensure the engine is cool and disconnect the battery. Remove the engine cover if necessary, then carefully detach the ignition coil connectors and unscrew the coils to access the spark plugs. Use a spark plug socket and ratchet to remove the old spark plugs, then install the new plugs, tightening them to the manufacturer's specifications. Finally, reattach the ignition coils and connectors, and reconnect the battery.
most misfires are caused by bad spark plugs, plugwires, coils, module, alternator or fuel injectors that need to be cleaned
To change the rear spark plugs in a 2005 Pontiac Montana, first ensure the engine is cool and disconnect the battery. Remove any necessary components obstructing access to the rear spark plugs, such as the engine cover or intake manifold. Use a spark plug socket to carefully unscrew and remove the old spark plugs, then insert the new plugs, ensuring they are properly gapped and torqued to the manufacturer’s specifications. Finally, reassemble any removed components and reconnect the battery.
Does it crank? do you have spark? fuel?
.035
IF IT IS A V6 JUST REMOVE DOG BONE ( STRUT THAT RUN TO THE ENGINE TO THE RADIATER SUPORT) ONECE REMOVED LEAVE CAR IN PARK GENTLY PUSH CAR FORWARD ENGINE WILL TILT FORWARD EXPOSING ROOM TO ROMOVE REAR THREE PLUGS