To remove the starter motor from a Ford Focus, first disconnect the negative battery cable to ensure safety. Then, locate the starter motor, usually found near the transmission. Remove the electrical connections from the starter, followed by the mounting bolts securing it to the engine. Once the bolts are removed, you can carefully pull the starter motor out of its position.
To change the starter motor on a Ford Focus, first disconnect the negative battery cable to ensure safety. Then, remove any components obstructing access, such as the air intake or engine cover. Unbolt the starter motor from its mount, disconnect the electrical connectors, and then replace it with the new starter. Finally, reassemble any removed parts, reconnect the battery, and test the new starter for proper operation.
The starter can be seen under the intake piping. Remove the pipe from the throttle body, and then you'll see the starter. You should be able to trace the negative battery cable to it. It has three bolts and can require much finesse to remove once unbolted.
On the passenger side and they are a prick to remove
on the starter , which is between the motor and the firewall. and under the intake man.
Disconnect the battery. Remove the H.D cable and starter solenoid wire from the starter motor, remove the bolts from underneath, remove the starter. BigBronco351
Begin by removing the positive cable from your battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new Ford starter.
what needs to be remove before you change
To remove the starter from a ford transit van, first you need to disconnect the battery. Once the battery is disconnected, you will find the starter on the gearbox facing the flywheel. At this point, you will need to remove connectors that are located on the back of the starter, and take out the bolts that hold it in place. By giving the starter a shake, the starter motor should come out.
Disconnect the - battery cable Raise and support vehicle Disconect wiring harness at top of starter Remove starter mounting bolts Remove starter
between the motor and firewall under the intake manifold
To replace the blower motor 2005 Ford Focus, you have to see the attached instructions on the manual. A screwdriver will help you remove the screw.
were is the starter on 2005 ford focus zx5