answersLogoWhite

0

Hey, you need to buy or rent a pitman arm puller. lock the steering wheel on center, remove pitman arm nut, then use the puller to release the pitman arm from the steering gearbox. make sure not to turn the steering wheel while unhooked from the pitman arm or you will damage the airbag clock spring in the steering wheel. good luck and be carfull ps, you may have to tighten the puller then tap the head of the screw on the puller then tighten then tap ect.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you remove o2 sensor from 1998 Chevy silverado?

unscrew it


How do you take a pitman arm off of a 1998 Chevy 1500 4 wheel drive?

On that year you will have to remove the gear box before you can pull the pitman arm off with a puller.


How do you drain the radiator on a 1998 Chevy silverado 5.7?

Remove the plug at the bottom or the rear of the radiator or remove the lower radiator hose


How big are the wheels on a 1998 Chevy Silverado?

The wheels on a 1998 Chevy Silverado are 288 x 288. The first GMT800 Silverado/ Sierra were released in 1998 as 1999 models. The Chevy Silverado is available with either rear wheel drive or four wheel drive.


How many idler arms and pitman arms do a 1998 Chevy Tahoe have?

1


What transmission is in a 1998 Chevy Silverado truck?

What transmission does a 1998 Chevy silverado 4x4 with vortec 350 in it have...it has a 4L60E OR 4L80E...60 HAS 17 BOATS AND 80 HAS 18


Will running boards from a 2006 Chevy Silverado fit a 1998 Chevy Silverado?

The board it'self might but the mounting brackets won't.


Will a rear window from 1998 Chevy Silverado fit a 1994 Chevy Silverado?

no,it wont.they are different sizes.just order it off of the internet.


1998 Chevy Silverado extcab transmission problems?

There are none .


What is the difference between a 1998 Chevy silverado and a 1998 Chevy Cheyenne?

Silverado's are the more luxurious version. They have carpeted floors and leather seats. Cheyennes have vinyl interiors and bench / couch seats.


What size torx bit is required to remove 1998 Chevy Silverado front brake caliper?

To remove the front brake caliper on a 1998 Chevy Silverado, you will typically need a T55 Torx bit. This size is used for the caliper mounting bolts. Always ensure you have the correct tools and verify the size, as variations may exist depending on specific models or aftermarket parts.


Where can one go to purchase a '98 Chevy Silverado?

There are a variety of locations one can purchase a 1998 model Chevrolet Silverado. Some places one may find a 1998 Chevy Silverado include Auto Trader, eBay, and Auto Forum.