Remove the clock from the dash.
Gently insert a small flatblade along the edge of the front case retainer and twist/pop it off. The lens is now easily removed.
pinch the lens side to side and it should come out.
remove the phlip screws in the lens. remove lens. push in on bulb while turning bulb out.
You should be able to pull the lens off to get to the bulb. After you take the bulb out you will see 2 little round pins. Just pull them of and disconnect the wires.
Yes I can --> can you?
the telescope, therometer, clock, and objective lens.
Remove the 4 bezel trim phillips screws around trim bezel. Unplug headlamp socket. remove headlamp.install new. replace bezel with 4 screws. yur done.
If you want to remove the BMW headlight lens simply follow the user manual.
After you take the headlight out, remove the metal clips holding the lens on. The lens has to be pried off because there is silicone there to keep it together
Most binoculars adjust the focus in 1 of 2 ways. End lens adjusting by moving the end of the large lens clock wise or anti clock wise like the old camera lens. Or between the two barrels there will be a thumb screw.
To remove a camera lens, first locate the release button or switch on the camera body near the lens. Press or slide this button to release the lens. Then, gently twist the lens counterclockwise to unscrew it from the camera body. Be careful not to force it, as this could damage the lens or camera.
There are two screws on either side of the lens cover remove them and remove the lens cover.Grasp the bulb and push gentle down now turn the opposite direction a clock would turn about 1/8 inchNow lift up and there you have it.Now open the package your new bulb is in and and reverse the process.
The entire lens of the eye is removed and replaced with a plastic lens.