I don't know - but I removed all the size 30 Torx head fasteners (look for extra one behind the wiring rubber hose thing..) then it seems the handle is restricting the removal - but the handle is rivited? on ?
I am removing the door because of an issue that I know occurs frequently, the door won't open, and you have to break out the black plastic cover and a piece of white plastic to get the door open to start removing the panel..
The way to get the exterior panel off is to have the door handle extended all the way and on the bottom of the handle is a rivet with a circle in the middle take a skinny Phillips screwdriver and press the circle all the way up until it clicks then take a flathead and pry out the rivet then slide the door handle out.
I don't know - but the question about the 1993 door handle is the same...
Since this question is in the Saturn area, it must be assumed that you are asking about removal of a Saturn door panel. The inner door panel of a Saturn is not removable, it is integral to the door frame. However, you can remove the outer door panel. First, remove the outer door handle; lift the handle enough to reveal the pins that hold the handle to the door latch mechanism, then press out the two pins and set the handle aside. Next, open the door and remove the screws around the perimeter of the outer door panel. After the screws are removed, the outer door panel should lift off easily.
No. To remove the widow its easiest to remove the outside panel
Using a screwdriver remove all the screws in the door panel, remove the clips, and pull the panel away from the frame, gently. Remove any wiring connection between the panel and the frame, and then pull the panel off the door frame.
To remove the door panel on a 1993 Mercury Cougar XR7, the first thing to do is to remove the lens covers from any lights in the door. The unscrew the light fixtures from the door. The door panel is attached by the use of clips. With a little nudging with a flat object, such as a screw driver, the clips will pop free of the metal.
Should be able to access after removing inner door panel
Replacing a skin is not a job for an amateur.
You will need to remove the inside door panel. Remove the door handle retaining screws. Remove the linkage from the back of the door handle.
start by taking the door panel off ....
someone please tell me exactly how to remove a rear door panel from a 1993 cadillac sedan Deville
The inside door panel cannot be removed; instead, to get to the inner workings of the door remove the OUTER panel. Lift the outer door handle to expose the pins that hold the outer handle to the door mechanism. Then press out the pins and remove the handle. Then remove the screws around the perimeter of the door that hold the outer panel. The panel should lift off, exposing all of the inner workings, then you can verify that the inner panel does NOT come off.
To remove the front door panel on a 1993 4Runner unscrew and pull off the mounting hardware, including the clips. The door panel will need just need to be pulled off.