To remove the door panel on a 1996 Thunderbird, first, ensure the window is fully up and disconnect the battery. Next, remove any screws securing the panel, typically located near the door handle and along the edges. Carefully pry off the panel using a trim tool to avoid damaging the clips, and then lift it away from the door frame. Finally, disconnect any wiring harnesses for power windows or locks before fully removing the panel.
u have to grind the hinges
Removing a door panel on a 1996 Cadillac Eldorado is very simple. The door is held in place by clips and a few screws. Remove the clips and the screws and the door panel comes right off.
The 1996 Ford Escort inside door panel is held in place by eight retaining clips. Pry outward on each retaining clip to remove the door panel.
you got to drill out the rivets from the outside and that's about it then there is a clip on the inside that you need to unhook to do that you need to remove the door panel that's it
Remove the screws from the handle and then the door panel will slide up. It has clips that will only let it slide up
The 1996 Mercury Cougar door panel is held in place by eight retaining clips into screws. Remove the screws. Pry outward on each retaining clip.
the door panel has a few clips on it that just snap in
It snaps in and laps over lower part of window one bolt by door handle
How to remove left inner door panel of a Pontiac Bonneville 1996
You have to remove the door panel, after that you will be able to replace the speaker.
remove door panel. disconect electrical connections and unbolt the mirror using a 10mm socket
you take it off, by taking it off how do you remove window hardware from panel?