To remove the door panel on a cavalier there are four screws on the under side and the back of the bottem lip. Remove those screws then there are 2 screw in the door handle. Remove those. remove the triangle piece of plastic where the mirror controls are then give it a little tug and the door panel should pop loose then lift up and walk away with it. If you have crank windows then you have to remove the crank lever and if you have electric locks the you have a clip you have to un do that powers the switch.
take it to safelite lol
2 Dr models, You must start with the door kick panels then remove the seat belts then the rear side panels then you can go after the rear dash.
Remove the 1999 Chevrolet Cavalier inside door panel. The mayor assembly will be visible. Remove the retaining bolts and wiring harness. Reverse the process to install the new mirror.
inside the doors. you have to remove the inside door panels
An instructional video on how to take a door panel off a 1999 Sonoma can be view on YouTube. Search for "How to remove door/door panels 1999 Sonoma/s10" and click on the first search result.
In a repair manual - I have Chilton's but Haye's will also do.
are they wind up windows or power windows? for power windows remove the door panel screws and pull. for wind up windows remove small metal snap rings behind the window handle. remove them and then remove all door panel screws and pull door panel off.
there are two screws on the door panel where you pull it shut and one more at the top of the panel then all you have to do is pull it of
remove the door panels
You don't need to remove front door panels, the speaker grills come out.
how to remove door panel 06 cdallac sts
To remove the door panels in a 1987 Ford Ranger, simply crank the cover on the door to pry it open. Then remove the head screws inside and take off the other three screws.