engine fan has treads backwards to tighten while engine is running...it would work loose if it did not. turn it to tighten it like a regular bolt to remove it hope this helps
You may need a universal joint if you are unable to get a socket straight on it due to the belts/fan.
how do you remove a fan blade from a 1998 ford explorer
check clutch fan
Remove the fan shroud, the clutch fan, drain the rad. from the lower hose, the water pump is right there. Enough room so you don't have to remove the rad.
depending on what year and what engine you will need to remove the fan and fan shroud the lower radiator hose the coolant bypass hose and in some cases the power steerig bracket. not that hard to do if you have some car knowledge
To remove the fan on a 1989 Bronco II, first disconnect the negative battery cable for safety. Then, remove the fan shroud by unbolting it from the radiator support. Use a wrench or socket to loosen the fan clutch bolts, and carefully pull the fan off the water pump shaft. Make sure to check for any additional mounting hardware or brackets that may need to be removed.
How to remove fan clutch on 2003 ford explorer
you have to have fan clutch wrenches
do you have to remove fan shroud to access thermostat housing on a 1997 2.3L ford ranger
find the power wire at the fan if theres power to it then the fan is bad
Need to know how to remove heater fan on 1999 ford e 150 van with small v6 engine
No