To remove the front rotors on a 2002 Infiniti QX4, first, lift the vehicle and remove the front wheels. Next, take off the brake caliper by unbolting it and securing it to prevent strain on the brake line. Remove the caliper bracket if necessary, then detach the rotor by removing any retaining screws and gently tapping it if it’s stuck. Finally, slide the rotor off the hub.
To replace the wheel bearings on a 2003 Infiniti QX4, first, lift the vehicle and remove the wheel. Then, detach the brake caliper and rotor to access the hub assembly. Using a bearing puller, remove the old wheel bearing from the hub, then press in the new bearing and reassemble the hub, rotor, and caliper. Finally, reinstall the wheel, lower the vehicle, and torque the lug nuts to the manufacturer’s specifications.
The manual sales "go to a licenses Infiniti service provider."
how do you remove the SRS?
where is the IAT sensor located on 99 qx4 infiniti
Behind the battery on front (L)eft side.
How many quarts in an infiniti qx4 97
There are two O2 sensors for the 01 QX4. One in front of the catalytic converter and other is behind the converter.
disconnect lines and hoses and remove fasteners
The fuel filter is located in front of the spare tire, easily reachable once you remove the spare tire. Tools to remove the spare tire are located under the carpet under the back seat.
The compressor on the INFINITI QX4 is typically located on the front of the engine, mounted to the engine block. It's part of the vehicle's air conditioning system, usually found near the serpentine belt. To access it, you may need to remove some components or covers, depending on the specific model year. Always refer to the vehicle's service manual for detailed instructions.
were is the thermostat located