To remove the frost plug from a 2005 Sprinter van, first, drain the coolant and ensure the engine is cool. Use a chisel or a flat-head screwdriver to carefully tap around the edge of the frost plug to loosen it. Once it's loose, you can pry it out using the chisel or a similar tool. Be cautious to avoid damaging the block while removing the plug.
drain coolant from radiator, remove one of the frost plugs in engine block, install block heater in place of frost plug, refill radiator with coolant.
Carefully remove the A pillar cover.. Then pop out the speaker screen..
Driver side of the block, about middle up and down, and front to back.
YES
i dont know if i used this befor.. wont let me in
There are two special tools that look like keys that are inserted to release locking tabs
Remove panel below steering wheel and refer to legend on panel for answer.
It uses a specific fluid. Dodge calls it Sprinter/Crossfire transmission fluid.
R134a
In the 2005 Sprinter, the cluster module, which houses the instrument panel and displays various vehicle information, is located on the dashboard, directly behind the steering wheel. To access it, you may need to remove the trim panels surrounding the dashboard. It's important to handle it carefully to avoid damaging the electrical connections.
Dry fill is 8 to 9 quarts of Sprinter/Crossfire trans fluid.
I use 15w40