You would need to take this to the dealer. I had to have mine done. They have to program the new cluster panel for your vehicle.
(they are pro rating the price up to 70,000 miles its a 180$ part about 600$ repair)
220.
The actual dash would have to be cut out, as it is attached. The gauge cluster un bolts from the back.
Remove the instrument cluster cover. Each instrument gauge is secured separately with retaining screws. Remove the retaining screws from each gauge. Remove the wiring harnesses from each gauge.
To remove the gauge cluster on a 2003 Acura RSX, first, disconnect the negative battery terminal to ensure safety. Next, pry off the plastic trim surrounding the cluster, then remove the screws securing the gauge cluster in place. Carefully pull the cluster out, disconnect the wiring harnesses at the back, and you can then fully remove the cluster. Reinstalling is simply the reverse process.
who should i see about a recall on 2005 chevy trailblazer for faulty fuel gauge and not working speed gauge who can i call about this for a recall was bought used
To remove the gauge cluster from a 2003 Dodge Ram, start by disconnecting the negative battery cable to ensure safety. Then, remove the trim bezel around the cluster by gently prying it off with a flat tool. Next, unscrew the screws securing the gauge cluster to the dashboard. Finally, carefully pull the cluster out, disconnect the wiring harnesses from the back, and remove it completely.
The gauge cluster is mounted from behind the dash with three bolts. You have to reach in behind there and remove the three nuts with a small wrench. Once you remove the nuts, the gauge cluster itself will push back through the dash. From there, you can remove the speedo itself from the cluster. The speedometer only has 3 small screws keeping it mounted to the gauge cluster.
To replace the bulb in the gauge cluster of a 1995 Toyota Previa, first disconnect the negative battery terminal for safety. Remove the dashboard trim and unscrew the gauge cluster from its mounting. Carefully pull the gauge cluster out and locate the burnt-out bulb; twist it counterclockwise to remove it and replace it with a new bulb. Reassemble the gauge cluster, secure it back in place, and reconnect the battery.
Buy a new Speedometer cluster. The external Temp gauge is extremely rare
To remove the gauge cluster from a 1992 Chevrolet Caprice, start by disconnecting the negative battery terminal to ensure safety. Then, carefully pry off the plastic trim surrounding the cluster. Remove the screws securing the cluster to the dashboard, typically located at the top and bottom. Finally, gently pull the cluster out and disconnect the wiring harnesses from the back before fully removing it.
The Miata.net Garage section (http://www.miata.net/garage/) has a wealth of information on all things Miata related.This is for a gauge-face install, which requires you to remove the gauge cluster, and includes complete instructions:http://www.miata.net/garage/gaugefaces.html
220 is not excessive