There is one small hex/torq bit screw, i believe on fender side of the headlight toward the top. just take out that one screw and the headlight should slide out of the rails that they are on.
remove the old bulb and keep the new one instead
how do i change to front brakes on a dodge durango?
how to remove lighter socket from 2013 dodge durango console
How do you change shift cylinoid on 1998 dodge Durango
you need to remove the small screw on the park /turn assembly from the front. then you have access to the 2 bolts on the bottom of the h/light then two higher up on either side.Ron
In a fuse box under hood.
You have to remove the trans oil pan to change fluid.
Open the hood of the engine compartment. Remove the wiring harness from the headlight. Remove the retaining bolts from the headlight assembly. The headlight unit will come out. Reverse the process to install the new headlight.
There is one hex/torq bit srcew on the fender side of the headlight. it can be hard to get to. take out that one screw, then pull the headlight out, it is set on rails. install the opposite.
Pull up on the tabs and remove the bulb.
you have to remove the headlight assembly 3little bolts
Behind the instrument Cluster. Or remove it and replace the Cluster.