I just finished taking this switch out of my 1965 Falcon convertible The body of the switch has a spring loaded button on the side that is opposite the wires. Pull the headlight knob out (as you would to turn the headlights on) then depress the button on the side of the switch. Then, while still holding the button down, pull the headlight knob all the way out. This can be tricky. Just jiggle and twist the knob slightly as you pull, it will come out. Then, using a bezel removal tool or a very wide cross tip screwdriver, unscrew the bezel where the stalk of the headlight knob went through the dash. The switch will then be free to remove. Please be smart enough to disconnect the battery prior to doing any of this. A scorched fuse panel is not a problem that you want to add to the defective headlight switch.
diagram colors to conest ignition switch
Ford XP Falcon was created in 1965.
Joe Falcon died on 1965-11-19.
First, remove the instrument bezel. Then, loosen the little set screw that holds the wiper switch knob on and remove the knob. Then, unscrew the switch bezel. Unplug the wire harness and pull the switch out of the dash. Nothing to it.
Any place that sells batteries can tell you the correct size for your Falcon.
3106
LOL that's what
0.025
1965
It is threaded into the master cylinder. If you can't reach from under, remove the fuel tank to expose the master cylinder and brake light switch.
No
no