you take it to the dealer caz you cant do it for sure its incredably complicated
99 jeep Cherokee Laredo stay running after turn off the ignition switch?
How to change the brake switch on a 2004 Jeep grand Cherokee Laredo
Remove steering wheel, turn signal (4 screws), and torx holding ignition, reverse to reinstall.
In my case it was the ignition switch itself had overheated and seized up. Replace the switch (have to lower the column, disconnect the wiring plug from the switch, and remove/replace the switch.) Clean all connections to the switch, make sure they're connected solidly and not heating up again.
How to remove ignition switch
It is not equipped with a fuel switch.
Remove the ignition switch retaining ring. Pull the ignition switch out. Remove the wiring harness from the back of the ignition switch. Reverse the process to install the new ignition switch.
No.
Remove the retaining ring from the top of your 1990 Lexus ignition switch. The ignition switch will slide out. Remove the wiring harness.
Remove the retaining ring from the top of your 1989 Chevy Corvette ignition switch. Slide the ignition switch out and remove the wiring harness.
The fog lamps are activated on a 2000 Grand Cherokee via the headlight switch. Pull the END of the lever OUT.
how do you remove an ignition switch from an 07 kia optima