answersLogoWhite

0

wour need wheel cutter, flat blade screw driver, cut some little slice on bolt to but the screw driver,you need to drop the steering colomn but no realese completely,unplud wiring harness connect to your ingnition swich.good luck!!!

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you remove an ignition switch on a 1996 Ford Taurus GL?

I have a 96 Ford Taurus and need to get the key switch out. Please help.


How do you remove the ignition switch of a 96 suburban?

To remove the ignition switch from a 1996 Chevrolet Suburban, start by disconnecting the negative battery cable to ensure safety. Next, remove the steering column covers by unscrewing the screws holding them in place. Then, locate the ignition switch, typically mounted on the steering column, and disconnect the electrical connector. Finally, unscrew the ignition switch from its mounting bracket and slide it out.


Is there a low oil cut off switch on 96 ford windstar?

( No )


Where is the holding pin on a 95 Ford Escort ignition lock you looked and could not find?

I just replaced the ignition switch and lock on my '96 Escort. They come as one unit, so you can't just replace the lock tumbler. Remove the steering wheel (using caution for the airbag), and then remove the multi-function switch. Now you can remove the ignition switch and lock.


Where is the oil pressure switch located on a 1998 Ford Windstar 3.8 liter 6-cylinder?

96 windstar 3.8 oil pressure switch is located under power steering pump. Remove serpentine belt and alternator. Remove PS pump pulley with special puller to get access to PS pump bolts. Drain PS pump and remove PS hoses. Remove PS pump.


Ford windstar 96 how to remove gas from tank?

Pump it out with an inexpensive hand pump.


96 ford Windstar power window motor removal?

I need to know the best way to remove and install the new window motor for a 96 Ford Windstar drivers side. Ray


Chevrolet 96 switch is locked need to unlock?

please need to know how to unlock ignition switch on my 96 chev college study have no money


How do you repair a ford Windstar 96 adjar door switch?

To repair a 1996 Ford Windstar's ajar door switch, first, locate the switch, usually found in the door latch mechanism. Inspect it for dirt or corrosion, and clean it if necessary. If the switch is faulty, remove it by disconnecting the wiring harness and unscrewing it from the door. Replace it with a new switch, reconnect the wiring, and test to ensure the door ajar light functions correctly.


Where is the oil pressure switch on a 96 ford windstar van?

The oil pressure switch is right under the alternator bracket or power steering pump


Where can you find the ignition switch on 96 Ford Escort?

The ignition switch is located in the steering column. If you are referring to where can you buy one, it can be bought at any auto parts store.


Integra 96 why it crank but won't start?

the wires from the ignition switch need to be replaced.