To remove the plenum on a 1998 Chrysler Cirrus, begin by disconnecting the negative battery cable to ensure safety. Then, remove the air intake duct and any connected components, such as the throttle body and vacuum hoses. Unbolt the plenum from the intake manifold, taking care to label or remember the placement of any hoses and wires. Finally, lift the plenum off gently, ensuring no components are left attached.
You have to remove the upper intake plenum.
remove throttle linkage, all wires to sensors, etc., there is probably a bracket on backside that you have to unbolt also. then remove all the bolts in top of plenum. lift up and out, making note if there is any vacuum hoses on the underside. you need to replace the plenum gasket before re-installing.
The hydraulic lifters on a 1998 Chrysler Cirrus are not adjustable.
You have yo remove the intake manifold(plenum),Go to your local auto parts store and get a haines manual.It will describe everything in detail.
First of all you can get to the first 3 plugs very easily. The other three you have to take off the plenum (be sure to replace the old plenum gasket)
How do i remove the anti theft system on my 1995 Chrysler Cirrus?
I access them from underneath, other people remove the wiper cowl and intake plenum.
battery behind front bumper in driver side wheel well. take off wheel and remove baTTERY COVER.
check the size of the engine, if it is the same it will fit
5w30
Yes
NoNo