Drive it to the Chevy dealer for service.
REMOVE DRUM, THERE MAY BE TWO SMALL THREADED HOLES IN THE DRUM. FIND TWO BOLTS THAT WILL SCREW IN THE HOLES AND TURN ONE TURN IN EACH BOLT TILL YOU JACK THE DROM OFF ~ NO JOKE, THEY ARE CALLED JACKING HOLES. I CAN NOT REMEMBER THE BOLT SIZE, BUT I WOULD GUESS 8MM
The rear brakes on a 1984 Chevy truck are drum brakes.
How do you remove the rear drum brakes on a 1998 ford escort
On the rear axle only
Drum
You gotta remove the bearing cover do the brakes and repack it with the recommended fluid/grease good luck to ya
I have a 1999 Suburban-JB6 brakes. The drum size is 11"
Adjust the brakes shoes inward to allow room to just pull the drum off.
To adjust the rear brakes on a Chevy Prizm, start by ensuring the vehicle is safely lifted and supported. Remove the rear wheel to access the brake drum. If the Prizm has drum brakes, locate the adjustment wheel or star wheel through the access hole on the backing plate and turn it to expand or contract the brake shoes until they lightly contact the drum. After adjustment, reassemble the wheel and lower the vehicle, then test the brakes for proper function.
i need a diagram of a 2005 Chevy silverado read drum brake setup
Once you get your brakes off, I would use a screwdriver to loosen the brake drum. It should come off easily after that.
Yes. There are manysuppliers of aftermarket bolt-on kits.
NO. I had a 96 and it had drum brakes. I believe the rear disk brakes started in 1998 for the Blazers.