answersLogoWhite

0

The lower seat comes out by pushing straight back at the front center of each of the two side seat positions and then pulling up. It will take a strong force. Try squatting in the footwell of each side and using your knee lean into the seat while lifting up. When you get the seat bottom out look at how the fastening method works to understand what you were doing.

The back section is bolted by seatbelt bolts at the bottom on either side of the center hump. Unbolt and lift the lower end forward. I'm not sure how the seat back is fastened on the upper back, but it might come off by a similar method as the seat bottom. Try pulling down and out on either side of each upper middle back to clear the hooks on upper back. Alternately there are two long screws protruding from the seat back in the trunk. The forward truck liner is fastened by velcro style fasteners at each speaker location, Pull the liner down at those locations and it will hinge down to reveal the seat back frame. There are some electronics in that area also.

---the top ones you'll need to come in from the trunk, 7/16 open end wrench is good.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Which year rear struts will fit a 95 Cadillac eldorado?

1992-2002, comparable Seville models should work also as they shared the same platform.


How do you remove the replace the covertible top motor of a 1976 Cadillac eldorado?

very simple task...first remove the rear seat, there you will see the motor, you should be able to take it from there.


How do you remove the rear seat in a 1989 Cadillac Eldorado?

To remove the rear seat in a 1989 Cadillac Eldorado, first, locate and remove any bolts or screws securing the seat bottom to the floor. Once unfastened, lift the front of the seat bottom and pull it forward to disengage it from the hooks at the back. After removing the bottom, you can access the rear seat back, which may require unbolting or unclipping from the vehicle's frame. Carefully detach it to complete the removal process.


How do you remove rear seats on a 1972 Cadillac Eldorado?

Push bottom in then up for bottom. Top has two bolts then lifts up out of clips behind seat


Where is the Pvc valve located on a 92 eldorado?

On a 1992 Cadillac Eldorado, the PCV (Positive Crankcase Ventilation) valve is typically located on the valve cover. It is often situated toward the rear of the engine, connected to a hose that leads to the intake manifold. To access it, you may need to remove the engine cover or other components for better visibility.


How do you remove the rear brakes on a 1995 Cadillac ElDorado?

To remove the rear brakes on a 1995 Cadillac Eldorado, first ensure the vehicle is safely elevated and secured on jack stands. Remove the rear wheel, then detach the brake caliper by unscrewing the caliper mounting bolts; support the caliper with a bungee cord or similar to avoid stressing the brake line. Next, remove the brake rotor by taking off the retaining screws or any clips, if present. Finally, replace the brake pads and reassemble in reverse order, ensuring everything is tightened to the manufacturer's specifications.


How do you remove rear speakers in a1992 eldorado?

by removin it who asked this


How would you remove the rear speakers in a 1990 Cadillac Sedan DeVille?

how would you remove the rear speakers to a cadillac sedan deville 1990.


How do you change rear shocks on a 1993 Cadillac Eldorado?

To change the rear shocks on a 1993 Cadillac Eldorado, start by safely raising the rear of the vehicle and securing it with jack stands. Remove the wheels for easier access, then unbolt the old shocks from the top and bottom mounting points using appropriate tools. Install the new shocks by positioning them in place and tightening the bolts to the manufacturer's specifications. Finally, reattach the wheels, lower the vehicle, and test the suspension for proper operation.


How do you adjust the ride height in the rear on a 1998 Cadillac Eldorado?

there is no way to adjust the ride height other then aftermarket suspension parts


How do you change the rear brakes on a 89 Cadillac Eldorado?

To change the rear brakes on a 1989 Cadillac Eldorado, start by safely lifting and securing the vehicle on jack stands. Remove the rear wheels, then take out the brake caliper by unbolting it and sliding it off the rotor. Replace the old brake pads with new ones, ensuring you compress the caliper piston if needed, and then reassemble by reinstalling the caliper and wheel. Finally, lower the vehicle and pump the brake pedal to ensure proper brake function before driving.


Where is the oil filter located in 1996 Cadillac Eldorado?

At the bottom of the engine, towards the rear of the oil pan, closer to the left front wheel.