Use a socket wrench with an extension (or two) and a 5/8" spark plug socket on the end. You do not need to remove the lower motor mount or tilt the engine, as some people will suggest. Just don't be afraid to climb up. Use a chair or step stool if you have to. I have had 3 Cavaliers and 3 Berettas, all with different size V6s, and I've never had to remove the motor mount to change the spark plugs. I'm not tall either. Average male, 5'8". Keep in mind that the spark plugs do not stick straight out. They are angled weird. Hint: Put the socket and extension over the spark plug first, then snap the socket wrench in place after. Works every time!
A person can replace the rear spark plugs very easily. Disconnect the battery, remove the cables/boots and the old spark plugs. Put in the new spark plugs, reconnect the cables and boots, and reconnect the battery.
On a Hyundai 2.7 (6) cylinder engine the (3) front spark plugs are readilly accessible from the front of the engine.... To access to the (3) rear spark plugs you must remove the intake manifold.
that he must remove to get to spark plug rear of the cylinders
To replace the rear spark plugs of a 2007 Arcadia, you will need to lift the car and replace the spark plugs from the bottom. You will also need to lower the front cradle for proper installation. This will allow easy access to remove and replace the spark plugs.
remove the pretty plastic on the top of the motor once remove you will have direct access to the front 3 spark plugs, to remove the rear spark plugs remove the intake manifold and then you will be able to access the back bank of spark plugs. then reassemble everything. tools needed ratchet and sockets and large extension
You will need to remove the spark plug wires on your Chevrolet 3.1 liter engine. Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. The spark plugs will come out. Reverse the process to install the new spark plugs.
YOU CAN REMOVE THE SPARK PLUGS WITHOUT REMOVING ANYTHING EXCEPT THE SPARK PLUG WIRES IN THE REAR USE A SWIVAL AND EXTENSION AND WORK ON BOTH SIDE AND THE MIDDLE OF THE PLETNIUM THE FRONT SPARK PLUGS NEED JUST TO REMOVE THE THREE COILS
To change the rear spark plugs in a 2005 Pontiac Montana, first ensure the engine is cool and disconnect the battery. Remove any necessary components obstructing access to the rear spark plugs, such as the engine cover or intake manifold. Use a spark plug socket to carefully unscrew and remove the old spark plugs, then insert the new plugs, ensuring they are properly gapped and torqued to the manufacturer’s specifications. Finally, reassemble any removed components and reconnect the battery.
To access the rear spark plugs on a 2007 Buick Rendezvous, first, ensure the engine is cool and disconnect the battery. Remove the engine cover if applicable, then take off the intake manifold or any other components obstructing access to the rear of the engine. Once cleared, you can reach the rear spark plugs, removing the ignition coils and spark plug wires if necessary. Be sure to use a spark plug socket to extract the plugs safely.
Remove oil filler cap, remove plastic cover (3 screws), remove air filter, remove coil packs, spark plugs can then be replaced. don't forget the three in the rear bank!
Remove oil filler cap, remove plastic cover (3 screws), remove air filter, remove coil packs, spark plugs can then be replaced. don't forget the three in the rear bank!
use the spark plug wrench and use used mirror to find the rear spark plug, you need to two person to do this, then fell the spark plug rear with your hands then apply the spark wrench to remove the old spark plug.