Undo the rivet under the lock, pop the black clip out and the lock slides out.
To remove the trunk lock from a 1997 Infiniti J30, first, ensure the trunk is open. Then, locate the lock assembly, which is typically secured by screws or clips inside the trunk lid. Remove these fasteners and gently pull the lock out of its housing. Finally, disconnect any electrical connectors if the lock has a keyless entry feature.
You have to open the trunk lid, under the lock on the inside you will find a screw, remove the screw and the lock retaining clip, pull the lock out. If you can not open the trunk lid, drill the lock center out, and you should be able to open with a screw driver.
To remove the trunk lock on a 2001 Toyota Camry, first, open the trunk and locate the lock mechanism. Disconnect the electrical connector by pressing the tab and pulling it out. Next, remove the screws or bolts securing the lock assembly to the trunk lid, then carefully pull the lock out of its housing. Make sure to keep track of any screws or clips for reinstallation if needed.
Show removel of trunk lock 1993 chrysler lebaron
If you look in the trunk you will see black wing nuts in the trunk. Remove the wing nuts then slowly pull out the tail light so you can un plug it. To unplug hold the tabs that lock it in place and then gently twist out. Then you gently twist the build to remove it.
* Remove the trunk lid latch * Detach the lock release box from the latch assembly * To detach the lock cylinder from the trunk lid pry off the retainer
Drill out the rivet.
It is not possible to replace the trunk lock on a 1993 Caprice Classic while the trunk is closed. A person will have to remove the back seat, crawl into the trunk and open the lock manually before it can be replaced.
remove rear seat and insulation
is an idea only-try to remove the back seat and crowl in to the trunk and see if you can turn the lock manualy
To replace the trunk lock on a 1976 Chevy Nova, first, open the trunk and remove the screws or bolts securing the lock mechanism to the trunk lid. Disconnect any wiring if applicable, then pull the old lock out. Insert the new lock into the same opening, secure it with the screws or bolts, and reconnect any wiring. Finally, test the lock to ensure it operates properly.
Remove rear seats