0
How do you remove the resonator box from the air intake system on a 2004 Chevy trailblazer 4.2 engine?
Simply unscrew the air intake hose from the resonator box. Then look on all 4 sides of the resonator for some bolts. Use a ratchet with an extension to unscrew the bolts, and it pops right off. Did it on my trailblazer to change thee spark plugs (located underneath the resonator box). Hope this helps!
What else can I help you with?
Where is the starter coil in a 2006 Chevy Trailblazer?
remove the intake on the top of the engine. they are under it. There will be 6. for a L6 engine and 8 for V8
Where is number 1 cylinder on Chevy Trailblazer?
4200 Vortec Inline 6 cylinder engine #1 cylinder is at the front of the engine as you stand out front and look at it. Remove the resonator box on top of the motor to expose the coil packs. The spark plugs are under them.
How do you remove a stock intake resonator from an 1994 Honda Accord EX?
http://www.cardomain.com/ride/731216/2
Will you damage your engine if you remove its cold air intake?
You will not damage your engine if you remove its cold air intake. The cold air intake system is merely added to increase engine efficiency and performance.
Where is the evap system purge solenoid on 2006 Chevy trailblazer?
The EVAP system purge solenoid on a 2006 Chevy Trailblazer is typically located near the engine, mounted on or near the intake manifold. It is connected to the vapor canister and the engine's intake system. To access it, you may need to remove some components for better visibility. Always consult the vehicle's service manual for specific details and diagrams.
How do you take the resonator bottle out of a 2004 Mercedes s430?
To remove the resonator bottle from a 2004 Mercedes S430, first, ensure the vehicle is cool and safely elevated. Disconnect the battery and then remove any components obstructing access, such as the air intake duct. Unscrew and detach the resonator bottle from its mounting points and hoses, taking care not to damage any surrounding parts. Finally, gently lift the resonator bottle out of its housing.
What is the labor time to change a thermostat on a 2004 Chevy Trailblazer?
remove and replace engine coolant temperature(ect)/chevy 2004 trailblazer
How do you remove the air resonator on a 2005 Chevy Colorado?
There are 2 bolts on the left side of the resonator.
How do you fix the engine coolant temperature sensor on a 2003 Chevy trailblazer?
REMOVE ALTERNATOR FROM DRIVERS SIDE OF ENGINE BLOCK.
How do you replace valve cover gasket on a 2003 Chevy Trailblazer?
First buy a the maintenance manual from Haynes to get an idea of the bolt locations and other issues. The bolts on the valve cover are covered by lots of things, so be prepared to take apart half the engine. Remove the air intake, throttle body, and resonator. Also remove the bolts holding the air conditioning line clamps. There are 2 of these bolts and one nut on the passenger side of the engine. Check to see if you can move the ac line easily out of the way. If not the ac system will need to be discharged. Remove the drive belt and alternator. Also remove the engine hoist clamp located next to the alternator. This is necessary to remove the air intake manifold which is covering four of the valve cover bolts. There are 6 bolts holding the air intake manifold to th engine block, and about three of them are very difficult to access. You will need a flex shaft, 1/4 drive sockets and lots of patience. Once all the intake manifold bolts are fully removed from the engine block the intake manifold can be moved out of the way. It is not necessary to fully remove the air intake manifold. It can be moved out of the way enough to access the valve cover bolts. Next move the coils from the valve cover, and relocate the wire harnesses. The valve cover can now be removed.
Where are spark plugs located on a 2004 envoy?
the plugs are located under your resonator. the resonator is the black box resting on top of the engine and it says 4.2 on it. it is connected to ur intake. u have to loosen the hose clamps on both sides and un screw the two bolts and after un screwing the two bolts u are able to remove resonator. after removing resonator u will see a line of COPS (Coil Over Packs) u must un bolt ech bolt on that then it will pop up and u can look straitgh down in to the spark plug.
Where is knock sensor on a 2001 6liter 4x4?
That engine has 2 of them and they both are underneith the INTAKE MANIFOLD You will have to remove the intake to be able to remove them.
