Press the shift lever detent button then lift up sharply
How do you remove calipers from a 1987 thunderbird? Like where do I start?
Close ratios in transmission.
18
there is a clip on the front of the shifter. pull this out and the outer part of the shifter will come off. next remove the center console. then you can get to the 4 bolts that hold the shifter in place.
u have to grind the hinges
To remove the shift knob on a 1990 Ford Thunderbird SC with an automatic transmission, start by locating the small set screw on the side of the shift knob. Use an appropriate-sized Allen wrench to loosen and remove the screw. Once the screw is removed, pull the shift knob straight up to detach it from the shifter lever. If it's stubborn, gently wiggle it while pulling to help it come off.
If you are referring to the inertia switch, it is in the trunk.
Remove fuel tank for access
To remove the back seat on a 1989 Ford Thunderbird, the first step is to remove the back of the seat. The back is held in by bolts on each side. After the back is removed, the seat area should come out after removing the floor bolts.
Ford Thunderbird was created in 1955.
According to the 2004 Ford Thunderbird Owner Guide : It came from the factory with a 50 / 50 mix of distilled water and Motorcraft Premium Gold Engine Coolant . ( YELLOW colored meeting Ford specification WSS-M97B51-A1 )