answersLogoWhite

0

pull the plug wires and you need a deep well socket i believe its 5/8

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you change spark plugs in a 2004 dodge neon?

Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.


How do you change the spark plugs on a 1994 dodge caravan?

Disconnect the battery, remove the spark plug cables and covers, and remove the old spark plugs. Next, put in the new spark plugs, attach the spark plug cables and covers, and connect the car battery.


How do you Change spark plugs on a 5.9 2002 dodge ram 1500?

To change spark plugs on a 5.9 2002 Dodge Ram 1500, locate the old spark plugs. These are located at the end of the 8 wires inside the vehicle's bonnet. Remove the old spark plugs and replace with new.


How can you tell if a spark plugs are fouled out on a dodge 1500 5.9?

You have to remove them and inspect.You have to remove them and inspect.


Does a dodge charger srt8 have 20 spark plugs?

The Dodge Hemi's have 2 spark plugs per cylinder which equals 16 spark plugs


How do you change the spark plugs on 2001 3.7L V6 1500 dodge ram truck?

They are under the 6 ignition coils. There is a coil for each spark plug. You have to remove the coils, and then remove the plugs.


Dodge ram 1500 5.7 2007 where are the spark plugs?

The plugs are located under the coils on top of the valve covers. You will need to remove the coils to access the 16 spark plugs.


Where are spark plugs on 2008 dodge advenger 2.4?

On the top of the engine. You have to remove the four coils to access the plugs underneath.


How many spark plugs does a 2004 dodge durango have?

4.7L has 8 spark plugs. 5.7L has 16 spark plugs.


How do you replace spark plugs on a 2006 dodge charger 3.5?

You have to remove the intake plenum. It just unbolts.


How do you change spark plugs in a 2005 Dodge Stratus?

To change the spark plugs in a 2005 Dodge Stratus, first, ensure the engine is cool and disconnect the negative battery cable. Remove the ignition coil or spark plug wire from each spark plug, then use a spark plug socket and ratchet to unscrew and remove the old plugs. Install the new spark plugs by hand to avoid cross-threading, then tighten them to the manufacturer’s recommended torque. Reconnect the ignition coils or spark plug wires and restore the battery connection.


Where are the spark plug on a 2007 dodge charger 3.5LV6?

you have to remove the plastic covering on the engine and then you will see where the plugs are, the coils rest on top of the plugs.