0
Get a 5/8" spark plug socket, socket wrench, and if you can a spark plug wire removal pliers. The spark plugs are located on the sides of the engine, between the exhaust manifold. Remove the wire covering the spark plug be careful ,don't just pull on it, first turn it, from side to side, using the pliers. Due to the heat the wire bonds with the spark plug and easy to tear them. So first twist them and then pull. Make sure you pull close to the end. Insert the socket on the spark plug and turn counter clockwise. Before you install the new plug, check the gap. Insert the new plug in the socket and turn it with your fingers three-to four turns is good. Make sure you turn in with your fingers first is very easy to damage the threat if you use the socket wrench. Once you feel the plug has gone straight into the thread use the socket wrench to tighten it. Its the same procedure for the rest of them.
What else can I help you with?
How do you change spark plugs in a 2000 Chevy Impala?
Remove the spark plug wires from your 2000 Chevy Impala spark plugs. Remove the spark plugs with a 5/8 deep well socket by turning the socket to the left. Reverse the process to install the new spark plugs.
How do you remove the spark plugs on a 2000 Chevy 1500?
With a wrench!!
How to replace spark plugs on Grand Vitara 2000?
Disconnect the battery, remove the spark plug covers and cable, and remove the old spark plugs. Put in the new spark plugs, replace the covers and cable, and reconnect the battery.
How do you get to spark plugs on 2000 interpid?
You unplug, unbolt and remove the coils. The plugs are under the coils.
How do you change the spark plugs in a 2000 Yukon XL?
you push in the wire after turning of the plug yhen get some pluers and get it out
How do you change the spark plugs on a 2000 Ford Focus SE?
Disconnect the battery, remove the spark plug cables and boot covers, and remove the old spark plugs. Properly dispose of the old spark plugs. Next, put in the new spark plugs, reattach the spark plug boot covers and spark plug cables and reconnect the battery.
How do you change the spark plugs on a 2000 VW Jetta VR6?
Disconnect the battery cables, remove the spark plug cables and covers, remove and dispose of the old spark plugs. Next, put in the new spark plugs, attach the covers and cables and reconnect the battery.
How do you change the spark plugs on a 2000 Plymouth Voyager?
Lift the hood, disconnect the battery, remove the spark plug cables and covers, and remove the old spark plugs. Next put in the new spark plugs, replace the cables and covers, reconnect the battery and close the hood.
How do you remove the spark plugs from a 2000 Suburban with a 5'3L engine?
To remove the spark plugs from a 2000 Suburban with a 5.3L engine, first, disconnect the negative battery terminal to ensure safety. Then, remove the ignition coil or spark plug wire from each spark plug by gently pulling it off. Use a spark plug socket and ratchet to carefully unscrew and remove each spark plug. Make sure to inspect the plugs for wear or damage before replacing them.
How do you get to the back spark plugs on a 2000 chrysler cirrus?
You have to remove the upper intake manifold.
How do you change spark plugs on a 2000 Mitsubishi Lancer?
To change the spark plugs on a 2000 Mitsubishi Lancer, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil or spark plug wires to access the spark plugs, then use a spark plug socket and ratchet to unscrew and remove the old plugs. Check the gap on the new spark plugs, install them carefully, and torque them to the manufacturer's specifications. Finally, reconnect the ignition components and the battery terminal.
How do you change the spark plugs on a 2000 ford crown Victoria?
Remove the coil on top of the plug. There's the spark plug.
