To remove and replace that spring without doing harm to the vehicle or yourself you can purchase a simple tool from your local auto parts store for less than $10 that will do just that.
Your local auto parts store will sell you an inexpensive tool that will remove and replace that spring easily. It should cost less than $20.
luck
Remove the inner kick panel. Disconnect the wiring harness. Drive the pins out of the hinges - remove door.
The 1998 Chevrolet Blazer door panel is held in place by eight retaining clips. Pry outward on each retaining clip to remove the door panel.
You will need to remove the inside door panel of your 1993 Chevrolet Blazer. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
i think you should remove the door first then remove the door panel by hitting it with a soft hammer to release it.
Remove the dash assembly to gain access to the blend door actuator.
Are the door interchangeable on an 1987 chevy truck and an chevy blazer 1988
The gross weight for a Chevy Blazer 2 door 4x4 is 5300 pounds. The Chevy Blazer was produced from 1983 to 2005.
You will need to remove the rear door speaker covers. The Chevrolet blazer speaker covers are held in place with two retaining screws. Remove the speaker retaining screws. Remove the speaker wiring harness.
my Chevy blazer 2001 4 door has 6 speakers
Yes, it should fit perfectly.