All you need is a 10mm allen socket with a 6" extension. remove that bolt and the steering wheel pops off. Yo uonly needed to remove the Mercedes logo in center of horn to access that bolt.
You must take them off. I took mine out of my '84 300 turbo by turning my steering all the way to the right. That gave me enough room to weasel it out between the steering and exhaust.
how to removed the front seats on 1987 Mercedes Benz ,300 SDL
When removing steering box the steering wheel has to be removed steering shaft is not remove able it will have to slide down when steering box is removed ie then remove pit man arm and bolts from the frame
Then you won't have power steering.
The first step is shutting the engine off. Second, the hood must be released and propped open. Third, the power steering reservoir cap needs to be removed. Re-add fluid and recheck the level by closing the cap. Removing the cap will indicate level and if further fill is needed (or not). The power steering cap will be marked with a steering wheel symbol for quick identification.
Use hacksaw! just cut the steering wheel and presto! you already removed your steering wheel
can not removed key
In a 1995 Mercedes-Benz E320, the power steering fluid goes into the power steering reservoir, which is typically located near the front of the engine compartment, often near the driver's side. The reservoir is usually marked with a steering wheel symbol and has a cap that can be removed for checking and adding fluid. It's important to use the correct type of power steering fluid recommended for your vehicle to ensure proper function. Always check the fluid level and top it off as needed.
To change the cabin filter on a e320 Mercedes the glove box needs to be removed. Once removed the cabin filter will be easily accessible. Then replace the unit.
It appears simple, just a bit exhaustivel; it looks like the power steering pump has to be removed. I am going to attempt it, wish me luck. I will post my results.
The location of the stereo on a Mercedes A class will determine how it is removed. For example, if the stereo is in the back of the car the process to have it removed can be more difficult than if it?æin the front. You will need to have tools to unscrew the stereo.
The steering wheel will have to be removed, turned to the proper place, then reinstalled. If there is an air bag system it will have to be disconnected first.