0
Instructions for this puzzling step were provided with speakers shipped from Crutchfield. 1. Exert pressure around the hole where the handle goes through the panel. 2. If you press hard enough, you'll see a wire horse-shoe-shaped clip that looks like the Greek letter Omega. 3. Slip a strip of cloth [terry cloth or shop towel] under the clip and, with a see-saw motion [or inverted shoe shine motion, lift up against the open end of the clip - it works best if the cloth is in a "V" shape, the better to engage the open end of the clip and its bent-out "feet". 4. Be careful that you don't lose the clip when it finally releases into the strip of cloth!
What else can I help you with?
How do you remove door window from 1968 Chevy Truck C20?
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
How do you remove the interior window handle on Chevy Cobalt?
There is a spring clip on the back of the handle that you have to get off before the handle will pull off, go to the parts store and get the special window crank removal tool to get it off.
How do you remove antenna on 1998 Chevy Express?
how do i remove an antenna to a 1998 chevy express 1500 van
How do you remove 1968 Chevy impala window crank?
Your local auto parts store will sell you an inexpensive tool for under $10 to remove the clip from behind the handle to release handle from door.
How to remove door handle 1987 Chevy?
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
How do you remove clip on window handle on Chevy Colorado?
Your local auto parts store can sell a simple tool for aprox $5 that does just that.
How do you remove window cranks from Chevy cobalt?
To remove window cranks from a Chevy Cobalt, first ensure that the window is fully up. Use a flathead screwdriver to gently pry off the plastic cover behind the crank handle, if present. Once the cover is removed, you’ll see a retaining clip or screw; use a pair of pliers to squeeze and remove the clip or a screwdriver to unscrew it. Finally, you can pull the crank handle straight off the shaft.
How do you remove the Door panel off a Chevy S-10?
just pops off after removing the window handle, if manual, and some screws for the armrest and maybe the door trim side of window.
How do you remove the window handle on a 1998 Chevy truck?
There is a spring clip located behind the handle that must be removed then the handle will slide off. You can purchase a tool for the job from most parts stores for very little money.
How do you remove the manuel handle window handle on a Chevy silverado?
Use a small screw driver to pry the tiny pin that holds it in place with the shaft. The pin looks like a paperclip and is wraped around the cylinder of the handle.
How do you remove the pinch bolt cover of a 2005 Chevy 2500 express van?
how do you remove the pince bolt cover of a 2005 Chevy express van
How do you remove window crank on 92 Chevy pickup?
A simple inexpensive tool is available at your local auto parts store. There is a C clip behind the handle that needs to be removed to release the handle.
