answersLogoWhite

0

Remove the switch panel to access door panel screw behind. Pry off door panel around outer sides and bottom and lift panel up and off. Motor is inside door near front at bottom of door and secured with large rivets. Drill out the rivets, replace motor, and secure with bolts.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

1991 Ford Aerostar Passanger side door power window will not go down How can you tell if its the switch or the Motor I can hear the motor work when I move the switch to raise the window?

It's the switch because the motor is getting power to go up but not down.


Does a 1991 ford aerostar 3.0 have a timing chain in its motor?

yes it does!


How do you jumper the window switch to get the window to come go up on a 1991 Ford Aerostar?

If you press the switch and hear the motor running, the the gear kit needs to be replaced. If you do not hear it, look at the dome light and see if it dims when you press the switch. If it does then you have a bad motor.


How do you remove the window motor on the drivers side front door on a 1991 Buick LeSabre?

To remove the window motor on the driver's side front door of a 1991 Buick LeSabre, first disconnect the vehicle's battery to ensure safety. Then, remove the door panel by unscrewing any screws and carefully prying it off to access the window motor. Disconnect the wiring harness from the motor and remove the bolts securing the motor to the door frame. Finally, pull out the motor carefully, making sure not to damage any other components.


How do you remove the power window motor from the front doors of a 1991 through 1994 Ford Explorer - all models?

First, remove the door panel. Depending on the location of your particular vehicle there will be bolts holding the window motor in place, or rivets that must be drilled out to remove the motor. Before you do that you must unbolt the window brackets from the bottom of the window and remove the glass. If you have any questions you may me @ melissasretard@msn.com


How do you remove the power window motor from the front doors of a 1991 through 1994 Ford Explorer all models?

First, remove the door panel. Depending on the location of your particular vehicle there will be bolts holding the window motor in place, or rivets that must be drilled out to remove the motor. Before you do that you must unbolt the window brackets from the bottom of the window and remove the glass. If you have any questions you may me @ melissasretard@msn.com


How do you replace window regulator 1991 3000gt?

Take the door panel off,you will need to remove 3 bolts for the window motor and then 3bolts(maybe4) that hold the regulator to the window


What you the gap for a 1991 aerostar spark plugs w30L motor V-6?

The correct gap is .044


How do you replace a window motor and regulator on a Nissan Maxima?

remove plastic moulding around door handle and door lock. unscrew door handle and unsnap plastic anchors around lower portion of door unscrew door panel from door. lift up on panel and remove. remove plastic. unscrew motor from door , let window down and remove two screws holding window. remove motor and metal bar replace and reverse process. 1991 Nissan maxima


How do you get the power window up when it just clicks 1991 ford aerostar?

take the door panel off and unbolt the regulator and jam the window until you can replace the regulator


Where is the window motor for 1991 Oldsmobile 88?

inside the door panel


How can you get the tailgate of a 1991 Toyota 4Runner down if the window is stuck in the up position?

Climb in the back and remove the panels for the tail gate. You have 2 options. Get a couple of wires and run them from the battery to the connector for the window. Then manually move the motor down. If the problem is with the motor then you must remove the motor mechanism to get the window to come down. Neither allow quick return of the motor to the up position, but they will allow you access to opening the door so the repairs can be done more easily.