at the base of the wiper arm is plastic it looks metal but it isn't remove it with a flat head screw driver then use a 1/2" wrench or sockett to remove the nut and the arm will come off
at the base of the wiper arm is plastic it looks metal but it isn't remove it with a flat head screw driver then use a 1/2" wrench or sockett to remove the nut and the arm will come off
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
what size wiper blades for 2003 chev cavalier
The board is under the cap in the Wiper Motor.
The 2003 Chevrolet Malibu takes 22" driver side and 19" passenger side replacement windshield wiper blades.
Remove plastic cap, remove nut, sing Twist & Shout, pry up wiper arm...
you have to remove the cowl panel under the windshield. it is attached with several screws
The 2003 Chevy Malibu takes a 22" drivers side and a 19" passenger side. When buying windshield wiper blades be sure to always use the application guide book at the store or now-a-days you can google 'lookup wiper size'.
The windshield wiper motor on a 2003 Ford Taurus is located under the cowl panel, which is the area at the base of the windshield. To access it, you'll need to remove the cowl cover and possibly the wiper arms. The motor is mounted on the driver's side, connected to the wiper linkage. Make sure to disconnect the battery before attempting any repairs for safety.
How do I change the wiper seitch on 2003 cts cadilac
I have the same problem, the dealer said that it is the windshield wiper cover, part number 88958136 (AC Delco). The cover has the circuit board mounted in it that controls the wiper motor. I bought on line at quite a savings, however, am trying to find out how to get to the windshield wiper motor to change it.
It is actually a wiper control module that controls this. I have replaced many of them. It is the cover that is screwed to the wiper gear box. Remove both wiper arms. Remove the plastic cowl cover below the windshield that covers from side to side. Once inside you will see the wiper motor/transmission assy. Disconnect the electrical connector, and remove screws from cover, and replace it.
Check for the part that is missing.