answersLogoWhite

0

Remove the plastic covers off the wiper arm retaining nuts.

Remove the wiper arm nuts with a 13mm socket.

Twist and pull with your finger tips and finger nails at the base of the small rubber squirt tubing off the hard plastic squirt delivery tubes.

You may have to yard up and down on the wiper arms pretty hard to get them loose from their tapered shafts. Don't be a mindless gorilla but be brave and keep at it. They will come loose.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you replace a wiper motor on a 1996 Hyundai elantra gls?

* Remove the wiper arms * Remove the windshield wiper cowl cover * Disconnect the electrical connector from the wiper motor and remove the motor * Remove the wiper motor retaining bolts * Pry the linkage arm off the wiper motor pin with a large screwdriver


Where is the windshield wiper control module for 1996 Lincoln located?

where is the wiper module located on a 1996 town car


Wiper relay location 1996 Jeep Cherokee?

Where is the windshield wiper relay located on a 1996 grand jeep Cherokee


What size are your windshield wipers on your 1996 Pontiac sunfire?

The 1996 Pontiac Sunfire wiper blade sizes are 22" drivers and 17" passenger side wiper blades. Do not buy by length-only however. See the Sources and Related Links section below for more information. Since there are over 22 different wiper arm attachments - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.


How do you take off the whole windshield wiper arms of a 1996 achieva sl Oldsmobile?

To remove the windshield wiper arms from a 1996 Oldsmobile Achieva, first, lift the wipers away from the windshield. Then, locate the small plastic covers at the base of each wiper arm and gently pry them off to expose the mounting nuts. Use a socket wrench to remove the nuts, and then carefully wiggle and pull the wiper arms straight off the splined shafts. Make sure to do this with the arms in the upright position for easier access.


How do you remove the windshield wiper arm on 1996 Pontiac sunfire?

Remove the plastic covers off the wiper arm retaining nuts. Remove the wiper arm nuts with a 13mm socket. Twist and pull with your finger tips and finger nails at the base of the small rubber squirt tubing off the hard plastic squirt delivery tubes. You may have to yard up and down on the wiper arms pretty hard to get them loose from their tapered shafts. Don't be a mindless gorilla but be brave and keep at it. They will come loose.


Where is the relay for the windshield wipers on a 1996 Rav4?

The windshield wiper relay switch can be found on the firewall in the engine compartment. The windshield wiper relay switch will be on the passenger side of the firewall.


Is there a fuse for the windshield wiper motor on a 1996 Toyota Camry?

Yes, there is a fuse for the windshield wiper motor on a 1996 Toyota Camry. It can be found in the diagram of the fuses in the maintenance manual or the owners manual.


How do you replace windshield wipers for a 1996 Toyota Avalon?

The windshield wiper arm is held in place by a retaining clip. Hold the retaining clip in and the windshield wiper arm will come off. Put the new windshield wiper on and read lease the retaining clip.


How do you align wipers for 1996 dodge caravan?

To align the wipers on a 1996 Dodge Caravan, first ensure the wiper arms are in the "off" position. Then, lift the wiper arms away from the windshield and remove the wiper blades. Reposition the wiper arms so that they rest at the appropriate angle, typically resting just below the base of the windshield. Finally, reattach the wiper blades and test the wipers to ensure they operate correctly without obstruction.


Where is the fuse for the windshield wipers on a 1996 E 250?

On a 1996 Ford E-250 : In the fuse panel under the drivers side of the dash : ( # 2 is a 30 amp fuse for the wiper control module and the windshield wiper motor )


What size wiper blades for a 1996-2000 Plymouth voyager?

All 1996-2000 Plymouth Voyagers take 28" replacement windshield wiper blades on both sides front.