0
What else can I help you with?
How do I repair IBM T40 power socket?
Stick you tongue to it!
What do you do when someone is electrocuted?
Switch off the power at the distribution board (NOT the local socket) - then use an insulated 'prop' to pull or push the casualty away from the source of electrocution.
My Samsung TV is power cycling after the main board was replaced. Why is the new board not working?
It could be due to a fault on the power supply board (Bad Caps). Assuming the 'main board' refers to the main processor board.It could be due to the new board not being an exact replacement.There could be a short circuit on the main board, taking one of the supply lines down.The plug in cables may not be seated properly or in the wrong socket.
How do you fix the cigarette lighter if the fuse is not blown?
If you are getting power in the socket--replace heating element If you are getting power to the socket, but not through it--replace socket and element
Why would power doorlocks self operate on an 1998 gmc Yukon?
Power door locks on a 1998 GMC Yukon may self-operate due to a faulty door lock actuator, a short circuit in the wiring, or a malfunctioning key fob. It is best to have a professional mechanic diagnose and repair the issue to prevent any further unexpected door lock operations.
What should you do when someone is being electrocuted?
Switch off the power at the distribution board (NOT the local socket) - then use an insulated 'prop' to pull or push the casualty away from the source of electrocution.
How can I troubleshoot and repair issues with my GE oven control board?
To troubleshoot and repair issues with your GE oven control board, start by checking for any loose connections or damaged wires. Next, reset the control board by turning off the power to the oven for a few minutes and then turning it back on. If the issue persists, consider replacing the control board or seeking professional help from a certified technician.
Do you have a wiring diagram for a 2001GMC Yukon XL?
I need a wiring diagram for the power seats in a 2001 GMC Yukon
2005 GMC Yukon backdoor power locks will not unlock?
2005 yukon BACK DOOR CATCH LOCK
Where is the power door lock relay for gmc Yukon?
The power door lock relay for a GMC Yukon is typically located in the underhood fuse box or the interior fuse panel, depending on the model year. To find it, consult the vehicle's owner manual for the specific location and diagram of the fuse box. Often, it's labeled clearly, making it easier to identify. If you're having trouble, checking a repair manual or online resources specific to your Yukon model can provide additional guidance.
How can I replace an electrical socket?
To replace an electrical socket, first turn off the power to the socket at the circuit breaker. Remove the cover plate and unscrew the socket from the wall. Disconnect the wires from the old socket and connect them to the new socket in the same way. Screw the new socket into place and replace the cover plate. Turn the power back on at the circuit breaker and test the new socket to ensure it is working properly.
No power to heat and air control panel on 93 Yukon?
Go bu a Haynes Auto repair Manual. Consult your local library's on line resources for auto repair. Check the fuse. if ok check the plug on the back of the switch on the panel, that means pulling the front of the dask maybe. Go bu a Haynes Auto repair Manual. Consult your local library's on line resources for auto repair.
