Chilton-and-Motors-both-make-an-excellent-manual-for-the-do-it-yourselfer!
They-will-explain-teardown-and-reassembly-techniques-on-most-all-repairs.
If-you-are-planning-to-own-the-vehicle-for-any-length-of-time,-it-is-a-good-investment-to-purchase-at-least-one-of-these-manuals.
They-are-worth-their-weight-in-GOLD!
They-will-also-help-you-to-understand-various-clips-and-fasteners-used-by-the-automakers,-inside-andthroughout-your-vehicle.
Try this they have all the parts you will need. www.latemodelrestoration.com
You should have access after removing inside door panels
Wow, a 49 caddy!!!!! The majority of door handles from this era were bolted on from inside the door. The door liner must be removed to access the bolts. I am not 100% sure about your 1949 Cadillac, but suspect it is the same.Wow, a 49 caddy!!!!! The majority of door handles from this era were bolted on from inside the door. The door liner must be removed to access the bolts. I am not 100% sure about your 1949 Cadillac, but suspect it is the same.
You must take the entire black housing out. The screws are located underneath the trim panel on the inside of the door. A lot of the handles break in cold weather. http://www.1aauto.com/1A/DoorHandleExterior/Chevrolet/Beretta/PLP1090050/37746 you can buy replacement handles at this website
They can be removed and replaced from inside, you need to remove the inside door panel to get access, then its a few clips on the sides.
To repair a sliding screen door, you can start by cleaning the tracks and rollers, adjusting the rollers for proper alignment, replacing damaged rollers or handles, and installing a new screen if needed.
no, you can buy a replacement door handle on eBay and remove door panel and just watch your plastic clips.
how do i repair theback door handle
There are any types of door handle which are used in door. types of door handles are :- Lever on backplate handles. Lever on rose handles. D Pull handles. Flush pull handles. Doorknobs. Thumb turns. Cabinet cup handles. Cabinet pull handles
Remove the door panel. You should be able to just grab the metal wire inside the door that goes to the door latch. Give it a yank.
how do I open a door when the handle broke and the part theat connects into the outer wall will not release?
There is a factory recall on some forenza door handles. Contact your dealer.