I am assuming you are talking about a front door power windoe regulator, but the back door is similar.
1-Remove the interior trim panel.
2-Unbolt the two bolts or nuts or clips securing the glass to the regulator.
3-Slide the window to the two-thirds down position, tip it forward, then slide it up and out of the door. If this frightens you, instead slide it all the way up, and secure it in place with a lot of masking tape. Removing it completely is much safer.
4- Disconnect the electrical connector.
5-Unbolt the 4 bolts mountin the regulator to the door and if there are three more for the motor remove them also.
6-Maneuver the regulator out of the door.
7-Install the new unit by reversing this process.
how to replace window toggle switch 1999 buick century
The way that replace a window regulator in a 2003 Buick LeSabre front drive side is by removing the door panel. Next, disconnect the electrical connector on the regulator and replace.
Replace window regulator.
you need to replace the regulator. dealership is the only one that has it about $170.00
No
Take your door panel off and replace them...
you need to replace the window regulator in the door. some come with a motor some come without. ask your local parts dealer.
from Ebay.com
See this post for instructions and photoshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
safe lite repair safe lite replace
Because of a bad design on the window regulator. Bad nylon spindle that guides and spools the metal cable. The only way to fix this is to replace the regulator.
In the alternator.