pop the hood. there should be a screw type holder that goes into the housing( just follow the wires) turn it to the left about a half turn, then pull it out, depending on the type of bulb it should either pull out or push the bulb in and turn to the left. it should then come out. install it just the opposite way
Most of the cars now have composite lights and the lights have to be revomed to replace the bulbs.
a Phillips head screw driver
how do u change front signal lights for corvette 1999
To replace front brake pads on a 2002 Ford Mustang safely raise and stabilize the vehicle. Remove the wheels and caliper. Slide out the front brake pads and replace with new units.
trouble putting right front signal bulb in.
To replace the front turn signal lights on a 1997 Acura CL, start by opening the hood and locating the turn signal light assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Remove the assembly by unscrewing the retaining screws or clips, then twist the bulb socket counterclockwise to remove the old bulb. Replace it with a new bulb, reassemble the light assembly, and reconnect the electrical connector.
How do you replace a front turn signal bulb for a 2000 sts cadillac?"
Not as front signals.
Turn on that fast blinking signal light and check to see if the front and rear signal lights are both working, chances are you have a burned out bulb. If both front and rear bulbs are flashing fast, replace the flasher relay.
With tools.
How do you replace the front turn signal bulb located on a 2001 Buick Century?"
If it is a 124 chassis remove turn signal lights first ( push them out clip inside engine compartment) you'll see screws on the sides