For the Mid-2005 Malibu (the boxy model, not the Classic) the headlights are part of the front light module that includes the headlights and the combination front marker/turn signal. This module is attached by two bolts on the top. These are easily seen if the top of the module is examined from above with the hood of the car open.
Remove the two bolts with a nut driver. Set the bolts and their washers aside for use in re-assembly. Lift the module slightly away from the the car body -- a few inches -- and look behind it to see where the lighting module wiring is plugged into the car's wiring harness. This socket has a retainer clip molded into it, but that is easily released. Then the wiring can be unplugged.
Take the light module to your work bench (or kitchen table). Look at the back of the module. There you will see three twist in bulb covers. Remove the cover that is over the bulb you want to replace and you have access to the bulb socket. Replace the bulb. Reverse the process to re-assemble.
You will need to take the complete headlight assembly loose or out to get to the bulb to change it.
I've got a better question, why is this question in the Chevy venture forum ?
newtest3
Pull the complete headlight assembly out to get to the bulbs. You first have to pull the front bumper off, along with the wheel well to get to the headlight assembly.
Remove tire & inner liner to gain access to head light assembly
To replace the headlight bulb on a 2005 VW Beetle, first, open the hood and locate the headlight assembly. Remove the plastic cover or twist the bulb socket counterclockwise to access the bulb. Disconnect the old bulb by pulling it straight out, then insert the new bulb without touching the glass and secure it by twisting the socket back in place. Finally, replace the plastic cover and test the headlight to ensure it's working properly.
Replace headlight bulb only when blown.
The bulbs unscrew from the back of the light assy. sometimes you have to remove it to get to the back.
To replace the headlight on a 2005 Suzuki Alto, start by opening the hood and locating the back of the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Remove the headlight bulb by twisting it counterclockwise, then replace it with the new bulb, ensuring it is secured in place. Finally, reconnect the electrical connector and test the headlight before closing the hood.
you will probably have to take the complete headlight assembly out to get enough room to change the bulb.
When you open the hood look above the headlight for two round plastic caps. Pull these upwards, it releases the light assembly.
To replace the headlight bulb in a 2005 Lexus RX330, first, open the hood and locate the back of the headlight assembly. Remove the cover by twisting it counterclockwise, then disconnect the electrical connector from the bulb. Carefully remove the old bulb by pulling it straight out, and insert the new bulb without touching the glass. Finally, reconnect the electrical connector, replace the cover, and test the new bulb to ensure it works properly.