i have a 02 escape and the valve is located on the right front side of the motor (drivers side) but i had to remove the upper intake manifold (big black piece of plastic) and the thorttle body plus the injectors metal bar to be able to reach it. by the way, it's not a metal valve but plastic and has a square plastic form that you can use to turn it. hopefully this help's.
PCV valve is located in the valve cover. start engine, allow to idle. disconnect pcv valve from valve cover and feel for vaccum. If you feel vaccum good, if not trouble shoot system. Pcv valve dirty, hose clogged or cracked, etc. check the rubber grommet in valve cover for deteriation, replace if necessary. if the old pcv valve is clogged the the hose may be as well, clean w/ solvent. install new valve and reconnect.
The PCV valve on a 2005 Ford Escape 4 cylinder is located behind the alternator. It is under the intake manifold.
The PCV is non-serviceable. It cannot be replaced.
The PCV valve has a check ball in it, That's what you are hearing. REPLACE PCV VALVE
I had the same question. Seems it does not have a PCV valve.
Where is the PCV valve located on 97 Toyota Camry and how to replace it.Read more: Where_is_the_PCV_valve_located_on_97_Toyota_Camry_and_how_to_replace_it.
On the 2.8 it's on top of the plenum at the back. disconnect the hose & unscrew the pcv valve & replace.
Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.
No PCV valve on this engine. Has "PCV system". Hose from valve cover to throttle body. Nothing to replace.
The PCV Valve is located in the Vaccum line above the alternator.
THERE ISNT ONE THERE IS A PCV VENT LOCATED AT THE REAR OF THE ENGINE
The PCV just slips out and slips in; no tools required in most cases.