0
This is only "help". I had to have this done by AAA 3 years ago. First disconnect the battery. Then, you have to remove all that platic covering under the dash at that side, remove all the plastic covering the steering column, and there is the "switch", usually two nuts holding it, attached to the column, a plug with all the wires pertaining to "on-off", and a connecting rod to the ignition key up by the steering wheel. Be sure to disconnect the battery to avoid 60amps to your wrench. I hope you weren't asking how to replace the ignition key cylinder. That is simple, but another task. Use a drift pin or nail to push the release pin (inside a 1/8' dia. hole beside the key), release and remove the old cylinder. Usually the key will have to be in the cylinder to remove it. Reverse to install the new key/cylinder. Position is critical in inserting the new cylinder. It must be exactly as the old one. And obviously, the old key will not work, unless you take the new cylinder to a locksmith to be rekeyed to your old key.
There is much more to this than can be described here. I recommend that you buy a copy of Haynes repair manual #38010 since it has a pretty good description of the process and some helpful pictures.
What else can I help you with?
Replace ignition switch for 1993 Buick century?
Replace ignition switch for 1993 buick century?
How do you replace the ignition switch on a 1993 Pontiac Grand Am?
It's really easy the switch is in the steering colume.
How do you replace the ignition switch on your 1993 Chevy K 2500?
Remove the retaining ring at the top of your 1993 Chevrolet K 2500 ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
How do you remove the Ignition switch assembly on a 1993 Acura Legend?
you have to replace the whole steering column
How do you replace the ignition on a 1993 Pontiac sunbird?
To replace the ignition on a 1993 Pontiac Sunbird, first disconnect the negative battery cable to ensure safety. Remove the steering column covers to access the ignition switch, then detach the wiring harness and unscrew the ignition switch from the column. Install the new ignition switch by reversing the process, securing it in place, reconnecting the wiring harness, and replacing the steering column covers. Finally, reconnect the battery and test the ignition to ensure it works properly.
1993 Grand Am engine cranks but does not start No spark No power to instrument panel gauges when key is in the on position?
ignition starter switch
How much should it cost for a mobile locksmith to replace an ignition key for a 1993 Mercury Grand Marquis?
At least $75
How do you replace the ignition switch on a 1993 Ford F150?
To replace the ignition switch on a 1993 Ford F150, first disconnect the negative battery cable to prevent any electrical issues. Remove the steering column cover by unscrewing the screws, then locate the ignition switch, which is usually mounted on the steering column. Disconnect the wiring harness from the old switch, unbolt it, and install the new ignition switch in the reverse order, ensuring everything is securely reconnected before reassembling the column and reconnecting the battery. Finally, test the new switch to ensure it functions properly.
How to replace ignition switch on 1993 buick regal?
I believe that the switch is located in the ignition cylinder (which you can get from any auto parts store). Unfortunately you'll need a steering wheel puller and a tilt removal mechanism before you can start with that.
How do you replace the turn signal switch located on a 1993 Pontiac Grand Prix?
My turn signal switch died on my 92 Grand Prix. Rather than attempting the repair, I took it to a shop. The steering column had to be removed to get to the switch.
What is the cost to replace the ignition switch on a 1993 Ford Ranger?
It depends on what part of the country you live in. Call a couple of local garages for estimates.
How Do You Replace A Headlight Switch In A 1993 Oldsmobile Cutlass Ciera?
how do you replace the headlight switch on a 1993 cutlas ceria*
