Disconnect the negative battery cable.
Loosen the hose band and remove the intake hose.
Remove the airflow meter attaching bolts and detach the wire harness connector.
Remove the airflow meter from the air cleaner housing.
Installation is the reverse order of the removal procedure.
the camshaft sensor is located in the distributor. you need to purchase the entire distibutor to replace the sensor.
"Where is the crankshaft position sensor on a 96 ford probe SE?"
where is the ecu located on a 97 ford probe
Ok well the ford probe discontinued production in 1997. On all Ford Probe models the fuel pump is located in the gas tank. So to service and or replace it you have to drop the gas tank. Not fun
It is located on the air filter box. Has a plug with 3 or so wires in it.
The crankshaft position sensor on a 1997 Ford Probe is located near the crankshaft at the rear of the engine, typically mounted on the engine block or near the transmission bellhousing. It is positioned to read the timing of the crankshaft’s rotation. To access it, you may need to remove some components, such as the intake manifold or other obstructions, depending on the specific engine configuration.
To locate and replace the speed sensor in a 1989 Ford Probe LX with a digital dash, first, ensure the vehicle is safely lifted and secured. The speed sensor is typically located on the transmission, near the output shaft. Disconnect the electrical connector and remove the retaining bolt to take out the old sensor. Install the new sensor, reattach the connector, and ensure everything is secured before lowering the vehicle.
On a 1997 Ford Taruas I was just quoated from Ford Dealer 375.00 labor plus parts
Replace it.
where can i find the temperture sensor on a ford fiesta 1997
R-134a
The mass airflow sensor would be between the engine air filter and the big engine air intake tube