answersLogoWhite

0

Take out glove box. Under dash is a computer- metal box to remove it you have to take out the two bolts through the opening where glove box was. After that is out there are 3 bolts holding in the fan.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you replace the blower motor 2005 ford focus?

To replace the blower motor 2005 Ford Focus, you have to see the attached instructions on the manual. A screwdriver will help you remove the screw.


How do you replace heater blower motor 2005 Bonneville?

To replace the heater blower motor in a 2005 Pontiac Bonneville, first disconnect the negative battery cable to ensure safety. Remove the passenger side lower dash panel and locate the blower motor, which is typically found near the firewall. Disconnect the electrical connector and remove the screws or bolts securing the blower motor in place. After removing the old motor, install the new one by reversing the steps, ensuring all connections are secure before reassembling the dash panel.


How do I fix blower motor on a 2005 Chevy Impala 3.4 L will only go on low?

Replace the blower motor resistor.


How do you replace the blower motor in a 2005 Chevy Silverado?

To replace the blower motor in a 2005 Chevy Silverado, start by disconnecting the vehicle's battery to ensure safety. Remove the passenger side lower dash panel and the blower motor cover to access the blower motor. Disconnect the wiring harness and remove the screws securing the blower motor in place. Install the new blower motor by reversing the removal steps, ensuring all connections are secure before reconnecting the battery.


Where is the blower motor located for a 2005 Pontiac grand prix?

in side under the dash on the passener side of the car


2005 Hyundai santa fe replace blower motor and resistor still not working?

you need a new blower motor resistor with auto temp control


How do you replace the blower motor resistor on a 2005 Kia Optima?

Remove the two screws that holds it in place next to the blower motor on the passengers side under the dash...............


How do you replace the heater blower motor in a 2005 Chrysler Pacifica?

A heater blower in a 2005 Chrysler Pacifica is a complicated process. To get this [project done, you will have to go to a mechanic and have it done.


How do you replace the blower motor in a 2005 Chevy cavalier?

To replace the blower motor in a 2005 Chevy Cavalier, first ensure the vehicle is off and disconnect the negative battery terminal. Remove the passenger side lower dash panel to access the blower motor, then disconnect the electrical connector and unscrew the mounting screws holding the blower motor in place. Remove the old motor, install the new one by reversing the steps, and reconnect the battery. Finally, test the blower motor to ensure it operates correctly.


How do you replace a heater blower motor for 2005 Buick lacrosse?

To replace the heater blower motor in a 2005 Buick LaCrosse, first disconnect the negative battery cable to ensure safety. Next, remove the passenger side lower dashboard cover to access the blower motor. Disconnect the electrical connector from the blower motor, then unbolt the motor from its housing and remove it. Install the new motor by reversing the steps, ensuring all connections are secure before reconnecting the battery.


How do you replace the heater blower motor on a 2005 Chevrolet Uplander Van?

To replace the heater blower motor on a 2005 Chevrolet Uplander Van, first disconnect the vehicle's battery to ensure safety. Remove the passenger side lower dash panel and locate the blower motor, which is typically situated under the dashboard near the firewall. Disconnect the electrical connector and unbolt the blower motor from its housing, then replace it with the new unit. Reassemble the dash panel and reconnect the battery to complete the installation.


How do you remove blower motor from a 2005 Subaru Outback?

To remove the blower motor from a 2005 Subaru Outback, first, disconnect the negative battery terminal for safety. Then, remove the passenger side lower dash panel and the glove box to access the blower motor housing. Disconnect the wiring harness from the blower motor, remove the retaining screws, and carefully take the blower motor out of the housing. Finally, replace it with the new unit, reversing the steps to reassemble.