It's not too hard. There are 3 small screws holding the distributor it in place. 2 on the top and one kinda hidden underneath. The rotor has a small set screw you have to take out to remove it. I'd go to Advance Auto Parts on a nice sunny day with your tools and someone there can sell you the parts and show you how to do it. They will lend you any tools you don't have. Just make sure you can locate and get to the bottom distibutor screw/bolt first. It will take a small sratchet wrench to fit under there. It's not too hard. There are 3 small screws holding the distributor it in place. 2 on the top and one kinda hidden underneath. The rotor has a small set screw you have to take out to remove it. I'd go to Advance Auto Parts on a nice sunny day with your tools and someone there can sell you the parts and show you how to do it. They will lend you any tools you don't have. Just make sure you can locate and get to the bottom distibutor screw/bolt first. It will take a small sratchet wrench to fit under there.
Tune it up. Replace the spark plugs, plug wires, distributor cap, rotor, fuel filter, and air filter.
To change the distributor cap and rotor on a 2002 Dodge Ram 1500 with a 5.9-liter engine, first disconnect the negative battery cable to ensure safety. Remove the screws or clips securing the distributor cap and carefully lift it off, taking note of the wire connections. Next, remove the rotor by unscrewing or lifting it off the distributor shaft, then replace it with the new rotor. Finally, install the new cap, reconnect the wires in the same configuration, and reconnect the battery.
Replace rotor / cut rotor & replace brakes.
how do you replace a taillight on a Honda 2002 Civic?
Yes
replace rack and pinion on 2008 honda odyssey
hi can i service my Honda fit 2002 car
Hood
Take it to a dealer
The 2002 Honda Civic EX engine uses coil-on-plug. There are no sparkplug wires.
where are the bolts?
To replace a headlight on a 2002 Honda Civic first prop the hood open. Locate the headlight housing inside the engine compartment. Find the bulbs and remove them. Install the new bulbs.