0
Just work your fingers in around the plastic frame of the dome light and pull down. It takes a little effort but the entire unit will drop down. You will then see the housing for the bulb. Snap that out and remove and replace with a new bulb. Line up the unit and push it all back in place.
What else can I help you with?
How do you replace a starter in a 2000 Dodge Intrepid?
I need detailed information on how to replace a starter for a 2000 dodge intrepid
What is 2000 Dodge Intrepid trouble code p0123?
Faulty fuel injector.......had to replace 2 on my 2000 Intrepid...Good Luck
Will the transmission out of a 1997 Dodge intrepid work in a 2000 Intrepid?
No
How do you replace the tail light on a 2000 Dodge Intrepid?
From inside the trunk you remove the three or four finger nuts to remove the entire taillight assembly. Once you get it removed you'll see the light plugs on the backside.
Will the rims off of a 2000 Dodge Intrepid fit a 1997 Dodge Intrepid?
yup i have a set off a 2000 on my 97 they fit perfect
How do you replace the PCV valve on a 2000 Dodge Intrepid?
On the 2.8 it's on top of the plenum at the back. disconnect the hose & unscrew the pcv valve & replace.
Does 2000 Dodge Intrepid have a cabin filter?
No.
Will a 2001 intrepid motor fit inside a 2000 Dodge Intrepid?
Yes.
Where is the reset switch for a 2000 Dodge Intrepid?
No reset buttons on a Dodge.
Where is the flasher relay for 2000 dodge intrepid RT 3.5?
how do you remove the flasher relay in a 2000 dodge intrepid. I got it unplugged but don't know how to remove it
What is the bolt pattern for a 2000 Dodge Intrepid?
5x114,3
Spark plug gap for 2000 Dodge Intrepid?
The spark plug gap for a 2000 Dodge Intrepid measures .050 inches. This is the equivalent of 1.2 to 1.3 mm.
