0
1) Removal of plastic bulb cover/lens: With your fingertips, pull rearward on the front edge of the plastic cover. You will need to bend the plastic cover slightly. After moving it rearward slightly, pull reaward and downward. The cover will snap off. After removing, you will see the tabs that hold the cover in place. 2)Changing bulb: The bulb can be pulled out. Do not touch the glass of the new bulb. With clean hands, use a tissue or paper towel to handle the bulb. The oil from you fingers will create a hot spot on the bulb and make it burn out sooner. If you do touch it, wash and rinse it with rubbing alchohol. 3) Reinstall bulb cover: Insert the tabs on the cover into the slots in the rear of the dome light. Pull rearward on the front of the bulb cover, bending the cover slighty. While pulling rearward, push upward on the cover, and it will snap back into place.
What else can I help you with?
How do you replace a dome light in a 2003 Pontiac Vibe that has a sunroof?
To replace the dome light in a 2003 Pontiac Vibe with a sunroof, first, ensure the vehicle is off and the light has cooled down. Gently pry off the light cover using a flathead screwdriver or a trim tool to avoid damage. Remove the old bulb by twisting it counterclockwise, then insert the new bulb by twisting it clockwise until secure. Finally, replace the light cover by snapping it back into place.
How do you replace a Tail light cover on a Pontiac vibe?
IT is in the sun
How do you replace a cigarette lighter in a 2008 Pontiac Vibe?
To replace a cigarette lighter in a 2008 Pontiac Vibe simply refer to the user manual.
Why do 2003 Pontiac Vibe parking lights stay on?
You need to replace the DRL (Daytime running light) Module
How can you temporarily disable dome lights on 2005 Pontiac Vibe?
To temporarily disable the dome lights on a 2005 Pontiac Vibe, you can locate the dome light switch, usually found near the overhead console or on the light fixture itself. Set the switch to the "Off" position. Additionally, you can check the vehicle's door switches; if a door is ajar, closing it should also turn off the dome lights. For a more extended disable, consider removing the fuse for the interior lights from the fuse box.
How do you change the Dome lamp in a 2003 Pontiac Vibe?
To change the dome lamp in a 2003 Pontiac Vibe, first, locate the dome light cover, which is typically found in the center of the ceiling. Gently pry off the cover using a flathead screwdriver or your fingers to avoid damaging it. Remove the old bulb by pulling it straight out, then insert the new bulb, ensuring it's securely in place. Finally, snap the cover back on to complete the installation.
How do you replace the radio light bulb in a 2005 Pontiac Vibe?
To replace the radio light bulb in a 2005 Pontiac Vibe, first, you'll need to remove the radio from the dashboard. This typically involves using a flathead screwdriver to carefully pry off the trim panel surrounding the radio. Once the radio is out, disconnect the wiring harness and locate the light bulb socket at the back of the radio. Replace the old bulb with a new one of the same type, reassemble everything, and test the radio to ensure the light is functioning.
How do you replace fog light assembly on 2005 Pontiac vibe?
To replace the fog light assembly on a 2005 Pontiac Vibe, first, ensure the vehicle is turned off and safely parked. Remove the screws or clips securing the fog light assembly by accessing them from beneath the vehicle or through the wheel well, depending on which side you are working on. Disconnect the wiring harness from the old fog light, replace it with the new assembly, and secure it in place before reconnecting the wiring. Finally, test the fog lights to ensure they are functioning correctly.
When was Pontiac Vibe created?
Pontiac Vibe was created in 2002.
How do you replace fog light on Vibe 2006?
To replace the fog light on a 2006 Pontiac Vibe, start by accessing the fog light assembly from underneath the vehicle. Remove the screws or clips holding the assembly in place, then disconnect the wiring harness from the old fog light. Replace it with the new fog light by reconnecting the wiring and securing the assembly back in place with screws or clips. Finally, test the new fog light to ensure it functions properly.
How do you change the tag light on a 2005 Pontiac Vibe?
To change the tag light on a 2005 Pontiac Vibe, first, locate the tag light assembly at the rear of the vehicle. Use a flathead screwdriver to gently pry off the lens cover. Remove the old bulb by twisting it counterclockwise, then insert the new bulb by twisting it clockwise into the socket. Finally, replace the lens cover to complete the process.
Where is Pontiac vibe fuse box?
where is the internal fuse box on a 2008 pontiac vibe
