0
I'm not a professional, so there may be a better way, but I did change the handle on the passengers side front door of my 2004. Remove the interior door panel by first pulling off the small triangle piece inside the side mirror. Then unscrew 2 screws, one in the hand cup and another near the door release handle. Then pull off the interior cover. It's held in place by plastic pins, so just tug. Then peel back the plastic cover and remove the black shield on the top on the door nearest to the rear. My handle was broken so pulling it out was easily done with some wiggling. There are to screws that require and Allen, hex wrench. One should be visible directly behind the handle. The other is behind a plug on the edge of the door frame, above where the lock gripes the car frame. Unscrew these to loosen the housing for the handle linkage. There was a red plastic holding a bar, which I flipped up but I am not certain it's necessary. Next pull the lock straight out, on the outside of the door. You should then be able to slide the old handle out, and the new handle in.
What else can I help you with?
How do you fix a 1996 Pontiac grand prix door handle?
The door handle of a 1996 Pontiac Grand Prix can be replace because broken units will can not be fixed. To replace a handle remove the unit from the door and unhinged the locking mechanism.
How do you replace outside driver's door handle on 1993 corolla?
How do you replace the panels on the outside of a 1995 pontiac Grand am?
How do you change the exterior door handle on 2003 corolla?
You remove it and replace it...
How do you replace door handle 2003 elantra?
To replace the door handle on a 2003 Hyundai Elantra, first, remove the interior door panel by unscrewing any screws and gently prying it off. Next, disconnect the door lock and handle linkage from the old handle. Remove the retaining screws or clips holding the handle in place, then replace it with the new handle, reassemble the linkage, and put the door panel back on. Finally, test the new handle to ensure it functions properly.
How do you fix the driver door handle on a 1990 Pontiac transport?
To fix the driver door handle on a 1990 Pontiac Transport, start by removing the door panel to access the handle mechanism. Unscrew and detach the broken handle, then replace it with a new or functional used handle. Reassemble the handle and door panel, ensuring all components are securely attached. Finally, test the handle to confirm proper operation.
How do you replace the interior door handle on a Chevrolet tracker 2003?
Remove screw slide handle forward and pull out from panel. Remove from door operner rod.
How do you remove a passenger side door handle to replace it on a 2003 f-150?
Remove inner door panel for acess
How do a repair the door handle on a Pontiac Aztek?
To repair the door handle on a Pontiac Aztek, first, remove the interior door panel by unscrewing any fasteners and carefully prying it off. Next, locate the mechanism connected to the handle and check for any broken parts; replace them as needed. Reassemble the door panel by snapping it back in place and securing it with screws. Finally, test the handle to ensure it operates smoothly.
How do you remove the front door panel on a 2003 Pontiac sunfire to change the speakers?
there is screws around the door panel and the right under the handle there is 2 of them then your door is off hope this helps you :)
How do you replace a blend air door on a 2000 Pontiac Bonneville?
how do you replace a blend air door assembly on a 2000 pontiac bonneville
How can you replace a door handle on a 2003 Hyundai Tiburon?
The 2003 Hyundai Tiburon has door handles that sometimes break or need replaced. They can be easily removed and replaced with a new part.
How do you replace an interior Ford Fusion door handle?
To replace interior Ford fusion door handle you must remove the door panel, take off the old handle and replace with the new one, and then replace the panel back on the door frame.
