First u must drain all antifreeze/water from your engine then u use a flathead screw driver and a hammer and knock them out
how much does a mechanic charge to replace a freeze plug on a chevy el camino 8.0
where is the freeze plug 94 nissan pick up?
To replace a freeze plug in a 1999 Chevy Venture, first, drain the engine coolant and remove any components obstructing access to the freeze plug. Use a punch and hammer to carefully tap the old freeze plug out, ensuring no debris falls into the engine. Clean the area, then apply a sealant to the new freeze plug and tap it gently into place until it's flush with the engine block. Finally, refill the coolant system and check for leaks.
Replace freeze plug in a 1998 ford windstar ?
How do you replace freeze plug 1999 Ford Taurus?
Replace the freeze plugs.... All of them. Chances are if one has rotted through, the others aren't far behind.
Where is the freeze plug. On a 1996 lumina3.1v6
where is the freeze plug located on a 1992 Chevy beretta and I need a picture on it also
the car is smoking on the left side is it the freeze plug?
freeze plug location 9 9 chevey Malibu
take a large screw driver and a hammer tap the old freeze plug in the block,replace it with a rubber freeze plug.tighten the rubber freeze plug with a wrench..the metal freeze plug that you pushed inside the block will not hurt anything..hope this helps!!!!
there is not just 1 freeze or (soft) plug, there is about 8 give or take a few