0
To replace the front strut on a Ford Festiva, start by safely lifting the vehicle and removing the front wheel. Next, detach the strut assembly by loosening the bolts connecting it to the steering knuckle and the strut tower under the hood. Remove the old strut and install the new one by reversing the process, ensuring all bolts are torqued to the manufacturer's specifications. Finally, reattach the wheel and lower the vehicle back to the ground.
What else can I help you with?
How replace front shocks Ford Focus 2000?
the 2000 ford focus has struts on the front. you can buy the strut/spring assembly for about 250 a pair online.
How do you replace the clutch in a 1991 Ford Festiva?
very carefully.
What size are the front speakers in a 1988 Ford Festiva?
The stock speakers in a Festiva are 4 inch all around
How do you replace a 1998 Ford Festiva fuel pump?
with blinker fluid
Installing Ford Festiva front wheel bearing?
To install Ford Festiva front wheel bearing, the engine must be stopped and the car taken to a flat surface. The jack is usually used to lift the vehicle.
How do you replace front coil spring ford escort 98?
To replace the strut you have to jack up the car on the side you want to do and take off the wheel. Then, take it loose from the strut tower on the top. There are 3 or 4 nuts. Then take it loose from the steering knuckle on the bottom. The whole strut assembly lifts out. To replace the coil you have to have a strut compressor. It compresses the coil spring so the top of the strut can come off. Once the top of the strut is exposed the coil can be taken off the strut.
How do you replace a strut on a 04 Ford Expedition?
Ford Expeditions don't have struds. they have shocks.
How do you replace front axle on a 1993 Ford Festiva?
To replace the front axle on a 1993 Ford Festiva, start by lifting the car and securing it on jack stands. Remove the wheel, then disconnect the brake caliper and rotor to access the axle. Next, detach the axle from the hub and the transmission by removing the retaining bolts or clips. Finally, install the new axle by reversing the steps, ensuring everything is tightened to the manufacturer's specifications.
How do you change Ford Festiva front brakes?
To change the front brakes on a Ford Festiva, begin by safely lifting the vehicle and removing the front wheels. Next, remove the brake caliper by unbolting it from the bracket, then slide it off the rotor. Replace the old brake pads with new ones, ensuring they are properly seated, and reattach the caliper. Finally, repeat for the other side, reassemble the wheels, and lower the vehicle.
How do you change front left wheel bearings on 91 Ford Festiva?
send it to a mechanic
When was Ford Festiva created?
Ford Festiva was created in 1986.
How do you replace a 1998 Ford Festiva turn indicator?
To replace the turn indicator on a 1998 Ford Festiva, start by disconnecting the negative battery cable for safety. Remove the screws or clips securing the turn signal assembly, usually located on the front or side of the vehicle. Carefully pull out the assembly and disconnect the wiring harness. Replace the old indicator bulb with a new one, reassemble the assembly, and reconnect the battery.
