Remove four push clips for the grille, then pull gently forward to remove the grille assy. Then remove Three 10mm headlight holddown bolts ,wiggle the headlight assy in an upward way until it popps out of it,s retainer clip. Remove headlight bulb in a counterclockwise manner, replace bulb. reverse removal procedure. EST time approx 5 minutes
To replace the headlight bulb on a 2008 Ford Focus, first, ensure the vehicle is off and the keys are removed. Open the hood and locate the back of the headlight assembly. Disconnect the electrical connector, then twist the old bulb counterclockwise to remove it. Insert the new bulb by twisting it clockwise, reconnect the electrical connector, and test the headlight before closing the hood.
Are you asking how to replace the entire headlight assembly -OR- how to replace just the headlight bulb? Just the bulb.
autozone.com repair info
To replace the headlight bulb on a 2010 Ford Focus, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the back of the headlight assembly. Disconnect the bulb socket by turning it counterclockwise, then remove the old bulb. Insert the new bulb without touching the glass, reconnect the socket, and test the headlight before closing the hood.
Replace headlight bulb only when blown.
Page 405 in your owner's manual.
On older vehicles you replace the entire headlight. On the newer vehicles you just replace the bulb unless the headlight assembly is damaged.
To replace the headlight bulb on a 2008 Jeep Wrangler, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the back of the headlight assembly; twist the bulb socket counterclockwise to remove it. Disconnect the old bulb by pulling it straight out, then insert the new bulb without touching the glass. Finally, reinsert the socket into the headlight assembly and twist it clockwise to secure it.
To replace the headlight bulb on a 2008 Buick Enclave, first, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector from the bulb and remove the bulb by turning it counterclockwise. Insert the new bulb, taking care not to touch the glass with your fingers, and reconnect the electrical connector. Finally, test the new bulb to ensure it works before closing the hood.
To replace a headlight bulb on a 2008 Acura MDX, first, open the hood and locate the back of the headlight assembly. Disconnect the electrical connector by gently pulling it away from the bulb. Remove the rubber cover, then twist the old bulb counterclockwise to release it. Insert the new bulb, making sure not to touch the glass with your fingers, and reverse the steps to reassemble.
How do you replace headlight bulb on 2004 Mazda Tribute?
How do you replace a 1999 Ford Escort headlight bulb?"